Adjustable Borla Exhaust

**Ramairgod84** · 10-28-2009, 05:23 PM

Selling Borla Adjustable exhaust with the plates. Comes in 2 pieces- 1. tips, muffler, axel pipe, 2. i pipe.

all you have to do is bolt it up and weld on the i pipe.

$450 + shipping firm

pm me for pics

**Ramairgod84** · 10-29-2009, 06:47 AM

**SSmokin99** · 10-29-2009, 06:24 PM

Goodluck with the sale. Looks like a nice system

**Ramairgod84** · 10-30-2009, 11:02 AM

thanks man. im thinking $425 + shipping

**Ramairgod84** · 11-01-2009, 08:21 AM

bump...

**Ramairgod84** · 11-03-2009, 05:37 AM

ok so $400 + shipping

**Ramairgod84** · 11-03-2009, 02:00 PM

ok for $500 + shipping, I will include 2 rims i previously had for sale, with some curb rash.
or just $400 + shipping for the exhaust

**TSnoop05** · 11-04-2009, 11:00 AM

What would an estimate on shipping to 80543 be?

**Ramairgod84** · 11-04-2009, 06:17 PM

Generally shipping can be around 130 for the exhaust, and then 30 per rim

**Ramairgod84** · 11-07-2009, 05:10 AM

bump....

**Ramairgod84** · 11-10-2009, 05:32 AM

bump...$375 plus shipping

**LSWONCOOP** · 11-11-2009, 04:32 PM

Bump 4 ya. I wish I had the money. I heart Borla (drool).

**JaycenK** · 11-12-2009, 05:39 PM

Is the sytem cut up? from the pics I cant tell if the pipe going to the over the axle pipe was cut or slip fit. what is the inside diamiter of the pipe going to the Y? and was it cut short of it's original full length?

**Ramairgod84** · 11-12-2009, 06:45 PM

it was cut because of its length to go over the axel. its the same size and it's a 3 inch diameter. the guy at the exhaust shop widened the pipe to fit it together. all it needs is to be welded together.

**Ramairgod84** · 11-21-2009, 05:58 AM

bump.... $375 plus shipping

**jeffsWS-6** · 11-21-2009, 10:06 AM

i bought my borla from a seller and it was only 35 dollars to ship, definatly not 130. send it fed ex. its the cheapest route.hope that helps

**Ramairgod84** · 11-21-2009, 10:32 AM

it depends on the size. This is completely put together as a unit. the only part that comes off is the pass side pipe and tips.

**camaro071** · 11-22-2009, 07:23 PM

will that fit for 01 T/A

**Ramairgod84** · 11-22-2009, 11:04 PM

yes it will. I had it on my 01 trans am

**jsremmos** · 11-25-2009, 10:27 PM

Just to help ya bro I build and ship exhausts. You should draw 4 lines at 12,3,6,9 oclock on the outside of the tubes about 3 inches long each and then cut directly in the middle of the lines on the tube and then when the person welds it back together they can just line up the lines and tack it and then when they weld it together it will be perfectly the same as you had it. You could cut it in 3 spots and it would greatly reduce te size of the box needed to ship it. It would only cost 25-30 bucks to ship and alot of people would rather make 3 more 2 minute welds and save 100 bucks in shipping. Just trying to help ya get it sold.

Thread: Adjustable Borla Exhaust

Thread Tools