Results 1 to 13 of 13
-
02-28-2006, 05:40 PM #1adudeGuest
01 and 99 SS LS1 Motors-Some LS1 Fbody suspention
Prices reduced on dealer replaced @38K motor out of rear ended 99 SS, showing 72K when yanked. $3,000 for motor, wire harness, ECM, complete from intake lid/base to the stainless steel tubular exhaust manifolds. I also have things like cats, ypipes, front&rear suspention parts, wheels from 99 and 01 SS, full exhaust and rear end from 01 SS, starter, A/C comp, alt., power steering pump, etc. available. PM needs. Thanks >>>Dan
Added 3-2-06
Also have 01 SS long block or motor. Pulled at 62K. Ran very strong when pulled. I can work up or down with accessories untill I run out. $3200 for motor complete w/harness and ECM. Thanks >>DanLast edited by adude; 03-03-2006 at 01:44 PM. Reason: Add motor
-
03-03-2006, 12:38 PM #2adudeGuest
ttt
-
03-06-2006, 10:58 AM #3
- Join Date
- Sep 2005
- Location
- Lake Worth Florida
- Age
- 72
- Posts
- 10
- iTrader
- 0
Purple- 1994 Mazda RZ 7
Have short block & heads but am interested in all acc off of 01 if you'll separate.
Chip
-
03-06-2006, 12:30 PM #4adudeGuest
Unless someone buys the motor without them first I won't take them off, but that isn't unusual.I will let you know if they become avail.
-
03-07-2006, 04:34 AM #5
- Join Date
- Oct 2005
- Location
- Stony Point New York
- Posts
- 13
- iTrader
- 0
Black- 2002 Trans Am WS6
are the rims both the same desighn and if so which design are they the Zr1 style or the tenspoke style? do they have tires on them and how much do you want for them?
-
03-09-2006, 08:48 AM #6adudeGuest
THREE silver painted stock Camaro wheels in very good condition $50 ea. Buy 1,2 or 3.
FOUR silver 10 spokes off my 01 SS that my kids buddy slammed into a pole. #1 & 2 are perfect #3 very minor 1/4" nick right on the edge of rim, easy fix. #4 is pretty funky, has about 6 or so inches broken off right on the rim edge. You could fix this one too if you wanted, or have a wheel guy do it but I want chrome C5s. 2 good ones $100 each all 4 $250 - buyer pays shipping from 34691 if I put them in boxes they could probably go UPS. Thanks guys,>>>>>Dan
-
03-11-2006, 09:52 AM #7
interested in the engine/tranny combo, what would you say to 2500? i'm hurtin for $$
-
03-11-2006, 10:42 AM #8adudeGuest
Nope
-
03-12-2006, 04:27 PM #9
- Join Date
- Mar 2006
- Location
- Jacksonville
- Posts
- 9
- iTrader
- 0
Black- 99 Z28
im interested in taking that motor with no accessories..
-
03-15-2006, 03:51 PM #10adudeGuest
Pm or email sent to all, please let me know if you did not recieve one. Thanks, >>Dan
-
03-18-2006, 05:42 AM #11
- Join Date
- Mar 2006
- Location
- Jacksonville
- Posts
- 9
- iTrader
- 0
Black- 99 Z28
Hey dan i lost the number.. but i sent you an e-mail
-
03-19-2006, 10:38 PM #12
- Join Date
- Dec 2005
- Location
- Huntington Beach, California
- Age
- 54
- Posts
- 416
- iTrader
- 0
navy blue metallic- 2001 trans am
any LCA's or adj panhard bar?
Looking for other than stock suspension
-
03-20-2006, 05:39 AM #13adudeGuest
Sorry, no fancy suspention stuff. I am going to make my own so's I can slap in that fat 9" I'm putting together. I want to get rid of those LCAs and torque arm
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
1998 Pontiac Trans am WS6 Complete Front Suspention
By Cargod9373 in forum Parts For Sale / TradeReplies: 0Last Post: 11-06-2007, 11:22 AM -
98 Ls1 Complete Motor Hear Run
By LS1VIVKI in forum Parts For Sale / TradeReplies: 2Last Post: 08-12-2007, 07:13 PM -
99 SS LS1 Motor complete and a few suspention
By adude in forum Parts Wanted / TradeReplies: 1Last Post: 03-05-2006, 06:13 AM -
99 SS LS1 Motor complete and a few suspention
By adude in forum Parts For Sale / TradeReplies: 0Last Post: 02-28-2006, 05:48 PM -
99 SS LS1 Motor complete and a few suspention
By adude in forum Parts For Sale / TradeReplies: 0Last Post: 02-28-2006, 12:05 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks