Results 1 to 10 of 10
-
02-03-2018, 10:18 AM #1
- Join Date
- Aug 2005
- Location
- Detroit
- Age
- 42
- Posts
- 1,664
Black/Red/Black/Red- 98WS6/06MCSS/86GN/06H3
Would these bolt right up to a 98 WS6?
-
02-03-2018, 02:24 PM #2
The bolt pattern should be the same, and they'd clear the brakes. Fronts would fit if theyre the 285s most likely, rears probably wouldnt since theyre 335s. I dont know if the hub diameter is the same. You can look all this stuff up.
-
02-03-2018, 03:29 PM #3
- Join Date
- Aug 2005
- Location
- Detroit
- Age
- 42
- Posts
- 1,664
Black/Red/Black/Red- 98WS6/06MCSS/86GN/06H3
-
02-04-2018, 03:55 PM #4
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 39
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
I have 295s and had to shave down the rear bump stops. 305/315s your looking at massaging the wheel well and rolling the lip. Anything bigger and your most likely cutting into stuff.
Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.
-
02-04-2018, 04:35 PM #5
- Join Date
- Aug 2005
- Location
- Detroit
- Age
- 42
- Posts
- 1,664
Black/Red/Black/Red- 98WS6/06MCSS/86GN/06H3
-
02-04-2018, 05:46 PM #6
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 39
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
It wasn't much grinding to get the 295s on. Just grind down the lip on the bump stump only takes a couple minutes with a grinder. Front 295s fit with no modifications.
-
02-05-2018, 11:16 AM #7
Looks like a pretty good price to me!
'89 Turbo Trans Am Pace Car (Mom's car now)
'68 Camaro - 572 coming soon
'67 Nova - 406 SBC, PG
'10 ZR1
-
02-06-2018, 06:04 AM #8
- Join Date
- Aug 2005
- Location
- Detroit
- Age
- 42
- Posts
- 1,664
Black/Red/Black/Red- 98WS6/06MCSS/86GN/06H3
-
02-06-2018, 06:06 AM #9
- Join Date
- Aug 2005
- Location
- Detroit
- Age
- 42
- Posts
- 1,664
Black/Red/Black/Red- 98WS6/06MCSS/86GN/06H3
-
02-07-2018, 05:57 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 08-25-2010, 02:40 AM -
Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 08-24-2010, 02:40 PM -
Center bolt to Perimeter bolt Heads, Coil Mounting help
By juiced99ws6 in forum Internal EngineReplies: 7Last Post: 03-30-2007, 11:38 PM -
wtb - 12 bolt - have cash & rebuilt 10 bolt for partial trade
By wesTXwitesnake05 in forum Parts For Sale / TradeReplies: 0Last Post: 07-09-2006, 10:17 PM
Bookmarks