Results 1 to 20 of 52
Thread: Whats on everyones wishlist
-
09-07-2008, 08:09 PM #1
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
Whats on everyones wishlist
Ive got a lot to do to my car before im done. What is everyones wish list for their cars?? Here is mine
OEM ws6 hood
383 with 224 cam and fast 92 92
headers/ true duals
Full interior redo
Full repaint
buffer
full suspension/rear end
right now i need to buy stuff for my tranny swap!
-
09-07-2008, 08:12 PM #2
I dont have an ls1 to wish parts for, so I'll wish for a 331 stroker motor with all my bolt ons but the addition of a paxton novi2000 supercharger.
Ls related, I wish for a low mileage black c5z06
-
09-07-2008, 08:14 PM #3
- Join Date
- Nov 2006
- Location
- Broken Arrow, OK
- Age
- 49
- Posts
- 23,345
Pewter metallic- 2000 Camaro SS
C6 w/ LS3
For the Camaro, a Moser rearend and a few other odds and ends. Its done otherwise.
-
09-07-2008, 08:23 PM #4
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
It sucks modding my car because Ill do something and two weeks later BAM something from 151k breaks and im broke dick for about two weeks.
I think im going to buy my new driveshaft/flexplate next after fixing my AC.
then i need to do my frontend and swaybars..
it never frikin ends! DD be damned!
sorry.. rant over... for now..
-
09-07-2008, 08:25 PM #5
-
09-07-2008, 09:10 PM #6
Short term.....
Fast 90 / 90 combo, 150 shot juice, complimenting head cam, Guages, A-pillar Guage pod, Harlan shift light, SFC's, Strut tower Brace, and maybe some LCA's.
This "short term" will take pry 3 years
....
-
09-07-2008, 09:36 PM #7
17" zr1 rims
new headlights
clear corners
30% tint
long tube headers, exhaust, and tips
maybe some white racing stripes...maybe not...
polyurethane mounts and bushings all the way around
new floor mats...haha...lame i know
re-upholster the interior later
maybe some different front seats
down the road an engine and trans rebuild...not sure what i want to do with the engine...maybe a 6.0L...nothin too fancy or over the top
strut tower brace and sub frame connectors
oil catch can
none of my stuff is really going to get done any time soon. the car is pretty much where i like it right now...haha...which is damn near stock
-
09-07-2008, 09:42 PM #8
- Join Date
- Jun 2008
- Location
- Alaska Until 2010
- Posts
- 117
- 08 Mazda CX-7 2.3l Turbo
everthing that will get a N/A T/A in the 10's
-
09-07-2008, 10:06 PM #9
- Join Date
- Apr 2008
- Location
- Charlotte, NC
- Age
- 35
- Posts
- 862
Black 2002 T/A M6- Green 1997 Ram 4x4
A new LS1 than I can love, and hold, and mod, and hopefully avoid head on collisions with women on the wrong side of the road this time...
-
09-07-2008, 11:17 PM #10
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
427 LS7 (I'll settle for a 402 LS2 though)
APS Twin Turbo Setup
Built T-56
Moser 9"
Full Suspension (set up for Drag Racing)
Supporting Bolt-ons
MT or Hoosier Slicks on Weld Wheels
etc...
-
09-08-2008, 02:35 AM #11
- Join Date
- Aug 2005
- Location
- Cape Coral, FL
- Age
- 39
- Posts
- 3,100
Mystic Teal- 99 Trans Am & 01 CBR 929
-LS2 402 built with Callies crank, diamond forged pistons and all ARP bolt, Fully Balanced.
-Patriot Stage 2.5 heads (AFRs would be nice but I honestly dont ever see myself spending that kinda money on heads)
Port matched 92mm intake and nick williams throttle body
-some where around 250-256 cam on a 112 LSA
-42lbs injectors with racetronix fuel pump kit.
-A glove box full of "I'm sorry I fucking killed you" halmark cards to give to my victims.
-
09-08-2008, 03:27 AM #12
What ever it takes to run at least somewhere in the 10's
-
09-08-2008, 05:46 AM #13
A For Sale sign.
-
09-08-2008, 06:04 AM #14
A restored 1969 Camaro Yenko black on torque thurst rims.
Full suspension, A built T-56 swap with an LT1 383 stroker swap with full H/C/I. Long tube headers with true duels X pipe and have glasspacks dump before the axcel.
and a Zex wet shot.
With the interior of an 04-06 GTO but minus the GTO labels on the seat and have it say yenko with the new ZR1 dash board.
-
09-08-2008, 07:35 AM #15
- Join Date
- Aug 2005
- Location
- Crystal Lake IL
- Age
- 47
- Posts
- 2,517
Pewter- 2001 Camaro Z28 M6
as it sit now the camaro is just about finished.
last mod, goes on/IN next season!
--LS3 bored/stroked with an F1 Procharger....
--bmr a-arms, k member
-
09-08-2008, 07:49 AM #16
- A really frakingfantabulous tune after the Vortech install
- Window tint
- Someone to come up with a live axle conversion
-
09-08-2008, 08:01 AM #17
- Join Date
- Aug 2007
- Location
- Corn and Soybean fields
- Posts
- 5,483
Gray/ White- 09Ram 1500 83 Thunderturd
Beer
12 Bolt Carrier Bearings so I can get this customer's gears togetherLast edited by GTP231; 09-08-2008 at 08:07 AM.
-
09-08-2008, 09:45 AM #18
Black C6RS
For the Camaro Speedinc street TT'd LS2
-
09-08-2008, 09:55 AM #19
#1 on my wish list is winning the Lottery.
Everything else just kind of falls into place after that...
-
09-08-2008, 09:56 AM #20
- Join Date
- Mar 2007
- Location
- Henryetta/Tulsa Oklahoma
- Age
- 39
- Posts
- 3,675
2016 Camaro SS - Summit- 2001 Trans Am WS6 - NBM
I'll try to go in order of importance.
A clean engine bay
Total suspension, everything....
FAST 92/92 Intake
Heads/cam, then a tune
Moser 9" or GM 12 bolt, anything but a 7.5" 10 bolt....
11" Meats for the rear, ZR-1 probably, like I have now but wider
A second set of rims, thinking stock SS rims maybe?
Some DR's
11-second timeslips
A nice custom paint jobLast edited by Y2KArcticSS; 09-08-2008 at 09:58 AM.
2016 Summit White 1SS - The DD - Mishimoto catch can, Solo axleback & secondary cat delete, LED sidemarkers & reverse lights, head/taillight blackout, RCC custom badges
2001 NBM Trans Am WS6 - Torquer V2 cam, Yank 3000 stall, Transgo kit, Racetronix fuel pump, TSP LTs, Magnaflow catback, Strano Springs/Koni STR.T shocks, 17x9.5/17x11 TTII's
2000 Arctic White SS #1667 - Sold
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What's everyones thoughts on the Putin,
By SiggyZ in forum Political / Debate ForumReplies: 6Last Post: 03-06-2012, 07:51 AM -
Question: Need everyones help for the camaro...
By mk99z28 in forum Camaro / SSReplies: 16Last Post: 02-11-2009, 02:06 PM -
Finally, the answer to everyones questions
By Z28_SS in forum Camaro / SSReplies: 3Last Post: 05-01-2007, 07:36 PM -
Couple questions about everyones oil pressure and temp
By 98Camarod in forum General HelpReplies: 7Last Post: 08-22-2006, 04:14 PM
Bookmarks