Took my Camaro out Yesterday

[Jays00ss]

First time I have had my Camaro out since the h&c/intake and dyno tune a few weeks ago. Sounds absolutely obnoxious with the open Borla (Love it). I was putting along through the supermarket Parking lot and loved watching everyones face, Priceless. Had a lot of thumbs up. Cam sounds absolutely amazing, and I feel like I am back in my old muscle cars again.

[ss~zoso~ss]

nice man, get some vids up

i wish i had a set up like that, what'd you put down?

[Jays00ss]

nice man, get some vids up

i wish i had a set up like that, what'd you put down?

400 rwhp and 390 tq, with a 35 splined 9" w/4.30 gears, and a strange chromoly driveshaft, at 5400 ft above sea level. I am Adding a underdrive pulley this week and a cutout at the end of the month.

[Jays00ss]

here is the dyno video that MR.Luos shot for me. http://home.comcast.net/~SlowassTA402/Jason.wmv

[DanWS6]

Car sounds great Jason, wish I could've gone down to see the dyno.

[Jays00ss]

Car sounds great Jason, wish I could've gone down to see the dyno.

Thanks Dan, Hopefully you will be on the road by the May cruise, Can't wait to see everyone again.

[buswwa]

That thing sounds amazing. I love that throaty rumble. Damn. Nice car.

[DanWS6]

Thanks Dan, Hopefully you will be on the road by the May cruise, Can't wait to see everyone again.

We'll see. I have lots of parts I need to decide on and order. Stupid car.

[ss~zoso~ss]

Christ that thing sounds nasty!

[Jays00ss]

That thing sounds amazing. I love that throaty rumble. Damn. Nice car.

Christ that thing sounds nasty!

thanks I like it too

[third_shift|studios]

400 rwhp and 390 tq, with a 35 splined 9" w/4.30 gears, and a strange chromoly driveshaft, at 5400 ft above sea level. I am Adding a underdrive pulley this week and a cutout at the end of the month.

that seems low? Maybe b/c of the sealevel?

[blkSS98]

Jason,
Do you have the borla w/ 1 or 2 pipes coming out of the left side? I thought they only made one w/ 2 pipes but I ordered mine from speedinc and it only had one pipe coming out of the leftside, pisses me off. Also, when you say open do you mean w/ the biggest baffle in it or no baffle at all? I have never tried it w/ no baffle.

[Jays00ss]

Jason,
Do you have the borla w/ 1 or 2 pipes coming out of the left side? I thought they only made one w/ 2 pipes but I ordered mine from speedinc and it only had one pipe coming out of the leftside, pisses me off. Also, when you say open do you mean w/ the biggest baffle in it or no baffle at all? I have never tried it w/ no baffle.

I have it with the 4 tips, 2 on ech side. I do not have a plate in the right back at all. Do you have a place to put different size plates in on the right side? If not you got the cheaper Borla setup.

[Jays00ss]

that seems low? Maybe b/c of the sealevel?

My tuner and the Dyno owner said it was because of My 9" with the 4.30 gears. Dyno's don't like low gearing. My heads are only ported stock 241 castings. I am real happy with the results and it pulls like a mother with my gearing. My torque is almost as much as the HP so the car pulls through the whole powerband. Also it is very streetable with excellant driving manners.

After I put my Underdrive pulley and cutout on, I'll go to one of our Dyno days with our local club and see how much more I can squeeze out of her.

Also we are suckin for some air up here in Denver 5400 ft above sea level.

Dyno's are for tuneing purposes only, The real test comes at the 1/4 mile track!!!

[Mr. Luos]

The numbers are right on to me.
9" with 4.30's through a T56 will read the same or lower than a 10 bolt A4.


I want to drive mine again.
Rearend is all together, ready for fluid and install.
Intake is shipping back tomorrow. Mamo ported that bitch FAST!

[Jays00ss]

The numbers are right on to me.
9" with 4.30's through a T56 will read the same or lower than a 10 bolt A4.


I want to drive mine again.
Rearend is all together, ready for fluid and install.
Intake is shipping back tomorrow. Mamo ported that bitch FAST!

Right on!!! Call me when your ready for the install, Not doing anything thursday all day. Can't wait to see slowass back on the road!!!

[Mr. Luos]

I forgot to mention....still waiting on Koni.

[DanWS6]

Right on!!! Call me when your ready for the install, Not doing anything thursday all day. Can't wait to see slowass back on the road!!!

Agreed. He needs to get that thing running so I can have a ride on the cruises this summer.

[Mr. Luos]

Yours will run.
Just needs a breaker bar to turn over.

[DanWS6]