Results 1 to 4 of 4
Thread: Need Help Asap
-
01-09-2007, 10:54 AM #1
Need Help Asap
Need to know if 58mm TB on NON PORTED STOCK intake is ok! the ported manifold i got doesnt fit, fucker sent me one from a corvette or something, its almost an inch off,... thats fine i'll just port the stock intake eventually, but will it be fine now with a 58mm tb on stock LT1 intake or do i have to put the stock tb back on?
cars in garage with problems, closing soon please help!
-
01-09-2007, 11:40 AM #2
If the TB is a stocker that was ported to a 58mm then no, but if the tb is aftermarket then you have to 'port' the intake.
But you can post it still on the motor by plugging up the hole with towel and use a dremel to open it up some.
There was an online guide for this let me see if I can find it.
-
01-09-2007, 11:53 AM #3
Found the install guide c/w pictures:
http://www.bfranker.badz28.com/96ss/58porting.htm
-
01-09-2007, 12:38 PM #4
Unless your car is very heavily modified you are better off either stock or with a 52... I have a 52 on my 383 and it is more than sufficient.
2002 Street ET Champion New England Dragway
1999 Street ET Champion Oxford Dragway
My Blog is here: http://www.downtime.com
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
need help asap
By clg82 in forum DrivetrainReplies: 5Last Post: 08-02-2008, 11:22 PM -
ls1.com plz hlp me asap thx
By DanWS6 in forum Almost Anything GoesReplies: 101Last Post: 04-14-2008, 09:10 PM -
Need Help Asap!!!
By clg82 in forum Firebird / WS6Replies: 8Last Post: 08-04-2007, 08:57 AM -
Help Asap!!!
By Ripper415 in forum External EngineReplies: 1Last Post: 08-13-2006, 05:33 PM
Bookmarks