Page 1 of 3 123 LastLast
Results 1 to 20 of 51
  1. #1
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    My bud's crazy ass WS6!!

    [ame]http://www.youtube.com/watch?v=v7egNlfyu-w[/ame]

    [ame]http://www.youtube.com/watch?v=6ii5aFTsgkk[/ame]


    He has the "ONLY" F-Body with this kit at this time. He was the 1st to get it put on. Made 600 rwhp at 9 psi on stock bottom end, stock 10 bolt, and stock clutch Just got off the phone with him, fried his clutch after 2XXX miles which I told him was amazing it lasted that long He went with a monster clutch good to 8XX+ and 9" is coming also with another dyno tune. I told him to get those rod bolts upgraded ASAP but we will see. Tried to pick me up for a ride in it yesterday but I was sleeping FML Says it will break the tires loose around 100 + mph.....oh, he's on stock tires also 275 Goodyear F1 craps I get a ride in it within 2 weeks
    ┌∩┐(◕_◕)┌∩┐

    Man: The Mods you are fighting,
    they are the biggest Men I have ever seen. I
    wouldn't want to fight them!

    Me: That is why no one will remember your name!

  2. #2
    O U 8 1 2 Spaz's Avatar
    Join Date
    Nov 1999
    Location
    over here...
    Age
    45
    Posts
    25,709

    []D [] []V[] []D
    1999 trans am

    nice!!!

  3. #3
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Pretty nuts for just S/C, Headers, Catback and injectors/tb. Nothing else done and all stock.


    EDIT: Racing him for Pinks, I should murder the fuck out of him due to Traction issues He can't use 1st or 2nd while mine hooks 90%

  4. #4
    ;) Packy's Avatar
    Join Date
    Apr 2001
    Location
    Surf City, NC
    Posts
    2,499

    Black/Screaming Yellow
    99 S/C TA WS6 & 04 Cobra

    Quote Originally Posted by blackSS01 View Post
    Pretty nuts for just S/C, Headers, Catback and injectors/tb. Nothing else done and all stock.


    EDIT: Racing him for Pinks, I should murder the fuck out of him due to Traction issues He can't use 1st or 2nd while mine hooks 90%
    That looks like a nice kit! I have been considering getting a top mounted SC for a while but cannot find a reliable kit so far. This one looks decent though!

    Until he gets a 9", a clue, and some sticky tires.

  5. #5
    Senior Member
    Join Date
    Mar 2009
    Location
    Milwaukee
    Posts
    3,276

    Arctic White, red/gray
    1997 Corvette, 92 Typhoon

    Quote Originally Posted by blackSS01 View Post
    Pretty nuts for just S/C, Headers, Catback and injectors/tb. Nothing else done and all stock.


    EDIT: Racing him for Pinks, I should murder the fuck out of him due to Traction issues He can't use 1st or 2nd while mine hooks 90%
    Are you really racing for pinks, cause I would love to be there for that. 600whp on the stock bottom end, i cant see that ending well. Thats alot of boosted power to be running on the stock bottom end.

  6. #6
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    No pink racing here, never race for pinks ever in my life, couldn't handle losing my pile of crap

    I agree, too much stock shit for 600rwhp, time will tell. Packy, when I have more time, I can give you more info about his issues/price/people to watch out for and so on

  7. #7
    ;) Packy's Avatar
    Join Date
    Apr 2001
    Location
    Surf City, NC
    Posts
    2,499

    Black/Screaming Yellow
    99 S/C TA WS6 & 04 Cobra

    Quote Originally Posted by blackSS01 View Post
    No pink racing here, never race for pinks ever in my life, couldn't handle losing my pile of crap

    I agree, too much stock shit for 600rwhp, time will tell. Packy, when I have more time, I can give you more info about his issues/price/people to watch out for and so on
    Sounds good! I looked into the DRE kit and it proved to be pretty jacked up. Also the Magnacharger is not as good as everyone thinks so I am curious to find out the details with this one. It seems Centri. S/C and Turbos are the F-bodies best bet for reliable power adders.

  8. #8
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,773

    Red Tint Jewelcoat
    2008 Trailblazer SS

    Okay....
    Stock tires with 600RWHP? Is he an idiot? Or he have a death wish?

  9. #9
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Quote Originally Posted by Mr. Luos View Post
    Okay....
    Stock tires with 600RWHP? Is he an idiot? Or he have a death wish?
    Possibly both He is doing the build the complete wrong way, should have started with suspension/rear end/tires first but he has hella cash and is doing it, just backwards.

  10. #10
    ;) Packy's Avatar
    Join Date
    Apr 2001
    Location
    Surf City, NC
    Posts
    2,499

    Black/Screaming Yellow
    99 S/C TA WS6 & 04 Cobra

    I think he should have forged the internals first. The boost characteristics and IAT's of that type of S/C can climb a lot higher than other and they don't offer good intercooling if it even has any. That stock block is not going to like that at all. He needs a meth kit on it pronto with a 50/50 mix to keep from melting a piston or breaking a ringland.

  11. #11
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by Mr. Luos View Post
    Okay....
    Stock tires with 600RWHP? Is he an idiot? Or he have a death wish?
    yo dude dont get made he's doing it the fun way around and you did it the boring way around

  12. #12
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Quote Originally Posted by Packy View Post
    I think he should have forged the internals first. The boost characteristics and IAT's of that type of S/C can climb a lot higher than other and they don't offer good intercooling if it even has any. That stock block is not going to like that at all. He needs a meth kit on it pronto with a 50/50 mix to keep from melting a piston or breaking a ringland.
    I think your right I told him he should have registered here and searched a bit before dropping close to 10 g's He has money for days If I had his cash.....I'd be rocking LS1.com as fastest F-Body........maybe not that fast but way crazier then I am now

  13. #13
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,773

    Red Tint Jewelcoat
    2008 Trailblazer SS

    Quote Originally Posted by 86 IROC-Z View Post
    yo dude dont get made he's doing it the fun way around and you did it the boring way around
    Mine goes.
    Fuck spinning.


    Although it will be on 315 SumiHomo's here soon....that will be your 'fun' way.

  14. #14
    Yeah baby! Yeah! silverWS6's Avatar
    Join Date
    May 2009
    Location
    okc
    Posts
    2,567

    Silver 2002 WS.6
    Red 1989 Formula

    That's exactly what i want in my engine bay!!

  15. #15
    rice,its what's fo dinner LeadFarmer's Avatar
    Join Date
    Jan 2010
    Location
    Arlington,Texas
    Age
    33
    Posts
    815

    Silver/Black
    00' z28-R.I.P 00' WS6 M6

    be sure to have the camera out for when he grenades the engine, rear, and wraps the car around a poll all at the same time.
    jk jk
    but srysly....what was he thinking?

  16. #16
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    In 92 I had a Chevy 454 I had build for my truck. It was a beast. Then some DB total my truck by T-boning it. After about 6 weeks couldn't find a truck/car that I liked to fit it into so I sold it to one of the guys in my unit. 2 weeks later he has me come to the track in Belton, Tx. He stuffed it into a 72 Nova. He runs it down the track, lifted the nose off the ground. When he comes back it sounded rough as hell. I look under the hood, he put on N2O kit. I didn't build it for N2O and told him so. He didn't care, I check his tach and it was maxed out. I told him he need to break the engine down and see what damage he did, he blows me off, takes it down for a 2nd run. I know the exact moment he hit the N20. His block split in 2-3 pieces. I was glad his check cleared 3 days before. Lesson I learn was if your going to build something like that there's a correct way of going about it, Both Packy and Luos are right

  17. #17
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Just talked to him, 9" is in the mail. He's getting ready to order a full forged bottom end and re-sleeve the block to 427 ci I can't wait to start college so I can throw money around like this. I told him to go with a different block before spending tons on re-sleeving. He says 800+ rwhp by end of summer is the goal

  18. #18
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,773

    Red Tint Jewelcoat
    2008 Trailblazer SS

    Quote Originally Posted by blackSS01 View Post
    He says 800+ rwhp by end of summer is the goal
    And what....
    11.69 at 134


  19. #19
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    Since he has some $$$ he wants to spend he can mail me some. I want a new 9" too and a LS6 crate engine will do me just fine.

  20. #20
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,467

    Black
    1999 TA WS.6

    Turbo

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is he crazy?
    By rajiv1998 in forum Internal Engine
    Replies: 9
    Last Post: 11-11-2008, 07:02 PM
  2. going crazy
    By TransAm11973 in forum Firebird / WS6
    Replies: 54
    Last Post: 01-30-2008, 10:08 AM
  3. crazy mo fo
    By ss~zoso~ss in forum Multimedia Section
    Replies: 5
    Last Post: 01-16-2007, 05:33 AM
  4. A Little Bit Crazy
    By ffej17 in forum New Member Introductions
    Replies: 5
    Last Post: 09-28-2006, 07:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •