Page 1 of 2 12 LastLast
Results 1 to 20 of 26
  1. #1
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Smile lol, it was worth a try (IROC related)

    So before dropping hundreds of dollars on my car, I figured I would see what I could do at little to no cost to me, which was partially described in my previous thread on the topic.

    Anyway, what I was hoping to do was read the PROM to copy the data, and then replace the data onto a new chip. The following is what happened.

    Here's ma computer



    And here's my MEMCAL


    The chip is soldered in, so instead of ruining a possibly working PROM, I decided to do some redneck engineering


    Fitting for a thirdgen, hmmm?


    Anyway, here's my nifty chip reader device


    Then I connected the chip




    Unfortunately, the chip was unable to be read no matter what configuration I inserted the chip into the programmer. Each time left me with the following error message:


    Didn't hurt attempting something that didn't cost anything, so I'm not too disappointed

    So, on to Plan V, or W, or X maybe, I've lost count at this point.
    Last edited by 86 IROC-Z; 07-05-2010 at 08:34 PM. Reason: pics

  2. #2
    Impounded
    Join Date
    Apr 2006
    Location
    park bench
    Posts
    1,399
    gmcheviac


    works all the time, sixty percent of the time

  3. #3
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by wheeliE-maxx View Post
    Click for full size
    works all the time, sixty percent of the time
    So that goes in between the MAF and the throttle body? Right?

  4. #4
    Veteran Blackbird WS6's Avatar
    Join Date
    Jun 2008
    Location
    van down by the river
    Posts
    1,935
    Quote Originally Posted by 86 IROC-Z View Post
    So that goes in between the MAF and the throttle body? Right?
    give or take thats about right.....BUT whatever you do, dont forget to hook up the battery to each end of that so called mexican part

  5. #5
    Impounded
    Join Date
    Apr 2006
    Location
    park bench
    Posts
    1,399
    gmcheviac

    Quote Originally Posted by 86 IROC-Z View Post
    So that goes in between the MAF and the throttle body? Right?
    naw, after the throttle body. It'll look cool like those people who put fake injector hat air cleaners ontop of carbs

  6. #6
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Jesus Christ Macgyver Thats looks well above my computer skills
    ┌∩┐(◕_◕)┌∩┐

    Man: The Mods you are fighting,
    they are the biggest Men I have ever seen. I
    wouldn't want to fight them!

    Me: That is why no one will remember your name!

  7. #7
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by wheeliE-maxx View Post
    naw, after the throttle body. It'll look cool like those people who put fake injector hat air cleaners ontop of carbs
    Awesome, I need to do everything I can to look cool!
    Quote Originally Posted by blackSS01 View Post
    Jesus Christ Macgyver Thats looks well above my computer skills
    I think "McGyver" woud've been more fitting if it actually accomplished something

  8. #8
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,759

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    I hate to ask but - do you think you might not have connected the correct pins in order to do what you were trying to do? Or is it just non compatible software?

  9. #9
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by SMWS6TA View Post
    I hate to ask but - do you think you might not have connected the correct pins in order to do what you were trying to do? Or is it just non compatible software?
    The programmer came with a thick manual I was following. Even after the few different things it said didn't work, I tried it in every which way just to be sure. It seems that the reader isn't able to read (or even detect) the type of chip I had.

  10. #10
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Quote Originally Posted by 86 IROC-Z View Post
    Awesome, I need to do everything I can to look cool!


    I think "McGyver" woud've been more fitting if it actually accomplished something
    Can't believe I spelled that wrong

  11. #11
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by blackSS01 View Post
    Can't believe I spelled that wrong
    lol you actually spelled it correctly, I spelled it wrong, I didn't even think to look at how you spelled it when I was responding lulz

  12. #12
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    Quote Originally Posted by 86 IROC-Z View Post
    lol you actually spelled it correctly, I spelled it wrong, I didn't even think to look at how you spelled it when I was responding lulz
    Thats fucking EPIC!!! I spell it right and with your post, I believed I was wrong and you were right

  13. #13
    Veteran pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    22,146

    Black & Blue
    '02 WS.6 / '07 Suburban

    Impressive attempt. Where did you happen to stumble upon a "Chipmaster"?

  14. #14
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by pajeff02 View Post
    Impressive attempt. Where did you happen to stumble upon a "Chipmaster"?
    The storage rooms at my father's office building have lots of goodies we're able to borrow when they're not needed.

  15. #15
    Exalted Cyclops 67CamaroRSSS's Avatar
    Join Date
    Feb 2007
    Location
    San Diego, CA
    Posts
    5,823

    2002 Z28 A4 NBM
    Sadly now demodded :(

    For some strange reason I kept expecting to see the "Dew" spilled all over the PCM...

  16. #16
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by 67CamaroRSSS View Post
    For some strange reason I kept expecting to see the "Dew" spilled all over the PCM...
    I would never dare risk spilling the nectar of the gods and wasting it on such heathenish idols such as parts from a 3rd generation Camaro.

  17. #17
    Exalted Cyclops 67CamaroRSSS's Avatar
    Join Date
    Feb 2007
    Location
    San Diego, CA
    Posts
    5,823

    2002 Z28 A4 NBM
    Sadly now demodded :(

    Being from (or at least residing in) a Southern state I assume you know of the relationship between Mt Dew and Jack Daniels?

  18. #18
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by 67CamaroRSSS View Post
    Being from (or at least residing in) a Southern state I assume you know of the relationship between Mt Dew and Jack Daniels?
    Honestly I hate Mt dew mixed with alcohol.

    I've also tried it with vodka which was fucking terrible. And I like vodka.

  19. #19
    Exalted Cyclops 67CamaroRSSS's Avatar
    Join Date
    Feb 2007
    Location
    San Diego, CA
    Posts
    5,823

    2002 Z28 A4 NBM
    Sadly now demodded :(

    When I was stationed in Colorado I shared a house with a couple of good ole southern boys.

    As Colorado had "Blue laws" (no alcohol sales on Sunday) we would buy 2 or 3 bottles of Jack on Saturday. They insisted on drinking it with Mt Dew so I played along.

    I agree though, Mt Dew DOES NOT mix with alcohol.

    Rum and Coke, OTOH....

  20. #20
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    Quote Originally Posted by 67CamaroRSSS View Post
    When I was stationed in Colorado I shared a house with a couple of good ole southern boys.

    As Colorado had "Blue laws" (no alcohol sales on Sunday) we would buy 2 or 3 bottles of Jack on Saturday. They insisted on drinking it with Mt Dew so I played along.

    I agree though, Mt Dew DOES NOT mix with alcohol.
    Concur. At least none of the ones I've tried.
    Quote Originally Posted by 67CamaroRSSS View Post
    Rum and Coke, OTOH....
    Now that's some good shit. $5 for a pitcher of that with a straw at a bar I frequent in my college town.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HOW TO'S: Drivetrain related..
    By ninobrn99 in forum Drivetrain
    Replies: 5
    Last Post: 05-30-2014, 06:59 AM
  2. Need some help from LS1.com mechanics (Non LS1 related)
    By blackSS01 in forum Almost Anything Goes
    Replies: 4
    Last Post: 10-12-2013, 04:25 PM
  3. T56 Related Questions.....
    By jfl330 in forum Drivetrain
    Replies: 14
    Last Post: 04-05-2013, 07:56 PM
  4. I need some help please. (A/C related)
    By DownSouth325 in forum General Help
    Replies: 5
    Last Post: 06-27-2007, 12:36 PM
  5. What to do now? (work related)
    By FSANE in forum Almost Anything Goes
    Replies: 10
    Last Post: 05-09-2007, 08:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •