live chat

[drift_raptor]

i just noticed the live chat thing how come more people don't get on there

[Knighthawk LS1]

Yo man i'm there

[snaggeltooth]

depends on the night .. Sometimes there is about 5 of us , sometimes no one shows ... Just whos on and such .... But it gets used alot more than it used to

[Knighthawk LS1]

Its Shit Talking Night Everyone In There!!! Now Now No Wnow
Go Go Gogo

[ss~zoso~ss]

[BLKCLOUD] 9:34 pm: Ya.
[ss~zoso~ss] 9:34 pm: it takes about 35 psi and a 200 shot of nitro
[ss~zoso~ss] 9:34 pm: with a bored out engine
[BLKCLOUD] 9:34 pm: And the stock rear end...but with "custom" strange axles
[snaggeltooth] 9:34 pm: Volvos are serious beasts
[ss~zoso~ss] 9:34 pm: with a decent cam
[BLKCLOUD] 9:34 pm: Buddy...what is "Nitro"?
[BLKCLOUD] 9:34 pm: And "bored" how much?
[ss~zoso~ss] 9:34 pm: N2O
[ss~zoso~ss] 9:34 pm: .50 over
[ss~zoso~ss] 9:35 pm: its got a girdle on it
[BLKCLOUD] 9:35 pm: That's importanta....because if you multiply bore x stroke, you get displacement
[ss~zoso~ss] 9:35 pm: with a foged crank ,pistons and rods
[BLKCLOUD] 9:35 pm: A girdle....LOL. That'll help
[BLKCLOUD] 9:35 pm: A girdle for the differential or for the main caps?
[ss~zoso~ss] 9:35 pm: main
[BLKCLOUD] 9:35 pm: They'd have to be made of unobtanium to hold that
[ss~zoso~ss] 9:36 pm: its a 4 bolt main
[BLKCLOUD] 9:36 pm: Do you know what a main cap is?
[ss~zoso~ss] 9:36 pm: yea
[BLKCLOUD] 9:36 pm: Volvo makes a 4 bolt main?
[BLKCLOUD] 9:36 pm: You've been reading too many Chevy magazines
[ss~zoso~ss] 9:36 pm: actually i' been tearing that engine downt too much
[BLKCLOUD] 9:37 pm: So what's the stroke?
[snaggeltooth] 9:37 pm: anybody know ford 4.6 ??
[BLKCLOUD] 9:37 pm: What kind of bearings do you use?
[BLKCLOUD] 9:37 pm: Specs on the cam?
[BLKCLOUD] 9:37 pm: Valve size?
[BLKCLOUD] 9:37 pm: What do you torque the rod bearings to?
[BLKCLOUD] 9:37 pm: Ya. I am pretty familier with the 4.6
[snaggeltooth] 9:37 pm: ok
[snaggeltooth] 9:38 pm: did they have a plastic intakes in 97
[BLKCLOUD] 9:38 pm: Yes
[ss~zoso~ss] 9:38 pm: dana bearings
[BLKCLOUD] 9:38 pm: Problems in 96-98....some of them cracked
[snaggeltooth] 9:38 pm: all of them ??
[BLKCLOUD] 9:38 pm: ss....convince somebody else
[BLKCLOUD] 9:38 pm: But if you want some advice....
[BLKCLOUD] 9:38 pm: when you're trying to tell this story....make it more believeable.
[BLKCLOUD] 9:39 pm: Not, not all of them, only some
[ss~zoso~ss] 9:39 pm: dude, people know that this car exists
[BLKCLOUD] 9:39 pm: I can't remember if they were recalled or not.
[snaggeltooth] 9:39 pm: a buddy of my dad has a 97 Vic .. A garage said it was cracked ......
[ss~zoso~ss] 9:39 pm: snaggs has seen it
[BLKCLOUD] 9:39 pm: Ya ok. Have a nice day and enjoy your 9 second street vovlo
[snaggeltooth] 9:39 pm: yea but it was all apart then ...Mr Page
[BLKCLOUD] 9:39 pm: errrl....Volvo
[ss~zoso~ss] 9:39 pm: its in the 10's cant hook
[BLKCLOUD] 9:40 pm: Quite possible it was cracked
[BLKCLOUD] 9:40 pm: Oh. Probably at about 135 mph, huh?
[ss~zoso~ss] 9:40 pm: lol, he's ingnoring me
[snaggeltooth] 9:40 pm: why did they crack??
[BLKCLOUD] 9:40 pm: Poor design, I guess
[ss~zoso~ss] 9:40 pm: yea 135 mph
[ss~zoso~ss] 9:40 pm: you see the thread?
[BLKCLOUD] 9:40 pm: Yea. Can't hook. 135. In the 10s. Gotcha
[BLKCLOUD] 9:40 pm: Manual tranny?
[ss~zoso~ss] 9:41 pm: no
[ss~zoso~ss] 9:41 pm: automatico
[BLKCLOUD] 9:41 pm: Automatic. Built....gutted....then built.
[ss~zoso~ss] 9:41 pm: nope, just built
[ss~zoso~ss] 9:41 pm: i mean gutted because like no stock parts were reused
[BLKCLOUD] 9:41 pm: Of course. Just built. By a Corvette shop
[ss~zoso~ss] 9:42 pm: yes
[snaggeltooth] 9:42 pm: well a real low 10 ..... ahigh 10 only about 129
[ss~zoso~ss] 9:42 pm: thats the only shop we have near by, and i know the owner
[BLKCLOUD] 9:42 pm: Because they know Volvo trannies, and know how to make them handle 700 HP
[ss~zoso~ss] 9:42 pm: i threw him 5 grand and told him to make it hold 800 hp
[BLKCLOUD] 9:42 pm: Right.
[BLKCLOUD] 9:42 pm: Good stuff! Wish this was posted on the Forum.
[ss~zoso~ss] 9:43 pm: lol
[ss~zoso~ss] 9:43 pm: copy paste