Results 1 to 20 of 21
Thread: I am looking for a safe way..
-
06-14-2007, 06:53 AM #1
- Join Date
- Jun 2006
- Location
- Clifton Park NY
- Age
- 53
- Posts
- 78
Artic White- 2001 Camaro SS
I am looking for a safe way..
to remove the dealer sticker from the back of my car. You know the one's they put on with their name. I am not looking to advertise for free. Anyone have any ideas that are safe to the paint?
-
06-14-2007, 06:59 AM #2
Try a hairdryer to heat it up. Usually they peel right off.
-
06-14-2007, 07:03 AM #3
hair dryer+some dental floss=kiss that sucker good bye. usually a little glue sticks, but use some soap, water, and a little elbow grease and that puppy will be history! just run the dental floss back and forth behind the decal after heating it up
-
06-14-2007, 07:10 AM #4
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 48
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
Use a hair dryer then get some goo be gone to get the residue off.
-
06-14-2007, 07:12 AM #5
- Join Date
- Aug 2005
- Location
- Pittsburgh, PA
- Age
- 43
- Posts
- 21,720
My life is a- Ben Stiller movie.
i hate that shit-especially on a super nice car like an LS1.
Luckily i yanked mine off before the glue could even dry-it was so hot and humid out when i pulled it too
-
06-14-2007, 07:12 AM #6
-
06-14-2007, 07:15 AM #7
- Join Date
- Jun 2006
- Location
- Clifton Park NY
- Age
- 53
- Posts
- 78
Artic White- 2001 Camaro SS
Thanks Everyone! I will try that right now.
-
06-14-2007, 07:28 AM #8
-
06-14-2007, 10:39 AM #9
40 grit sandpaper on an electric sander should take that bitch out in half a second.
-
06-14-2007, 10:49 AM #10
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
I just placed a picture of Spaz next to mine and it fell right off.
-
06-14-2007, 11:03 AM #11
-
06-14-2007, 02:30 PM #12
- Join Date
- Jul 2005
- Location
- Mile High
- Posts
- 2,517
BlackCherry- Bad Ass 67 Camaro / 2010
I never bought any other product, I used a piece of Dental floss, and then some WD-40. The oil breaks down the glue and will rub right off.
Cost - $0.00
-
06-14-2007, 02:44 PM #13
- Join Date
- Apr 2006
- Location
- Indianapolis, IN
- Posts
- 4,886
All Black- 83, 87, 02 All WS6 T/As
Thankfully the original owner orderd the car.. so it never got the sticker.. and then when I bought it.. through the Stealership.. I didn't let them have it long enough to put one on.. told them I needed it NOW!
-Geno
1983 Black WS6 "WindCharger"
1987 Black WS6 "WS87"
2002 Black WS6 "Silver Streak"
Sold the other four f-bodies
-
06-14-2007, 04:30 PM #14
I just peeled it off and used a clay bar to get the residue off.
-
06-14-2007, 08:36 PM #15
- Join Date
- Apr 2006
- Location
- yuma arizona
- Age
- 43
- Posts
- 2,020
silver- 1998 Z28
next time, tell the dealer to remove it, or to give you a discount for advertising for their dealership.
-
06-14-2007, 08:40 PM #16
- Join Date
- Apr 2006
- Location
- Indianapolis, IN
- Posts
- 4,886
All Black- 83, 87, 02 All WS6 T/As
Good idea!
-
06-14-2007, 08:42 PM #17
-
06-15-2007, 09:59 AM #18
NOTE: mustang owners believe anything can and SHOULD be fixed with a screwdriver/and or hammer. engine knock? hit the head with hammer. windshield wipers stuck? screwdriver. decreased full mileage? just hit that fuel cap with a hammer and you'll be enjoying 35mpg in no time!
-
06-15-2007, 10:34 AM #19
-
06-15-2007, 11:13 AM #20
- Join Date
- Nov 1999
- Location
- over here...
- Age
- 46
- Posts
- 25,709
[]D [] []V[] []D- 1999 trans am
fire...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Safe N20 Kit??...
By tyxpx in forum NitrousReplies: 13Last Post: 05-02-2010, 04:31 PM -
Is it safe?
By blackwidowls1 in forum External EngineReplies: 1Last Post: 08-19-2007, 09:21 AM -
what kr is safe?
By matt89 in forum Forced InductionReplies: 7Last Post: 07-21-2007, 06:23 PM -
I am also looking for a safe way to...
By my5thNewUsernameHere in forum Almost Anything GoesReplies: 12Last Post: 06-17-2007, 04:48 PM -
Is this safe?
By Rowen in forum General HelpReplies: 4Last Post: 08-14-2005, 02:33 PM
Bookmarks