Help...looking for this power swithching adapter

***SMWS6TA*** · 12-09-2013, 07:08 AM

Alright my fellow internet gremlins....need help finding this below:

I've checked all the radio shacks and got nothing....

**67CamaroRSSS** · 12-09-2013, 08:29 AM

I'd start here:
TDC Power Products Co., Ltd.

**NE-Firebird** · 12-09-2013, 08:40 AM

What does the connector look like? It's likely standard.

Measure the connector, and look on Amazon, ebay, etc.

If you can cut off the old connector, and use it, then you can splice on the old connector. Make sure you know which wire is positive.

Good Luck!

Amazon.com: NEW Genuine Real D-Link Power Supply AC ADAPTER 5V 3A JTA0302C: Electronics

Pin Size / Dimensions: 2 x 5.5 x 9.6 mm approx. Connector Type: 90 Degree right angle Round Barrel.

***SMWS6TA*** · 12-09-2013, 09:10 AM

ya'll going to laugh but it's for the led Christmas lights. Damn thing is only 2 yrs old, second time it's up and just quits. I swapped one from another set and the lights work so I know it's this.

I tried that site and they only deal in bulk. I don't need 50.

**theorangeguy** · 12-09-2013, 11:26 AM

got a picture of the other end of the connector...? Most of these little things are interchangeable...just need to find one with the same style connection.

***SMWS6TA*** · 12-09-2013, 11:37 AM

I just dropped it off at a shop that may be able to fix it for $20 (told them anymore forget it).

It's a 2 prong connector for outside use. It's threaded so the led cable can screw on and keep moisture out.

***SMWS6TA*** · 12-24-2013, 08:17 AM

Originally Posted by NE-Firebird

Amazon.com: NEW Genuine Real D-Link Power Supply AC ADAPTER 5V 3A JTA0302C: Electronics

Pin Size / Dimensions: 2 x 5.5 x 9.6 mm approx. Connector Type: 90 Degree right angle Round Barrel.

Thanks, I had to go with this. The shop said they could fix.

**NE-Firebird** · 12-24-2013, 04:55 PM

Originally Posted by SMWS6TA

Thanks, I had to go with this. The shop said they could fix.

Glad you found a fix!
It's not hard to do if you have both power supplies, a wire stripper, Volt/Ohm meter (DVM), heat shrink tubing, and the experience.
You could figure out how to do it by watching youtube videos. But, that would take time.

Imho, $20 is a good price, and you'd likely spend more on the Volt/Ohm meter (DVM) and heat shrink tubing.

Merry Christmas!