Results 1 to 20 of 23
Thread: Am i missing anything?
-
02-05-2009, 01:32 AM #1
Am i missing anything?
So heres my list come spring time but i want to order everything and make sure its all there when i go to install it. Is there anything i should get to compiment something else? Any gaskets, bump stops, etc.
ARH headers 1 3/4
SLP exhaust with a magnaflow bullet muffler in its place
UMI 2 point Bolt-in SFC's
Eiback lowering springs (should i go with 1.5 and 1.3 in the rear or 1.7 and 1.8 in the rear)
NGK TR55-IX spark plugs
180 degree thermostat
Afterthoughts auto corsa clone tips
SLP CAGS eliminator
anything im missing that will make this easier or am i missing anything to compliment something else? I already have the SLP CAI
-
02-05-2009, 05:58 AM #2
Might want to get new gaskets for those headers. I would also swap out the wires while I am doing the plugs (its only like $80 more)
-
02-05-2009, 06:30 AM #3
I would recommend an adj. panhard bar and lca relocation brackets since you're lowering the car.
Also, I see you're getting a !cags and a 180 stat. The !cags makes me think you don't have a tuner in which case you can't adjust the fans so the 180 stat which you really should do when going to a cooler stat.
-
02-05-2009, 07:34 AM #4
- Join Date
- Aug 2005
- Location
- Marshfield,Ma
- Posts
- 77
blue- 2000 SS
I thought 2000 and later cars came with the 180 tstat. Could be wrong its happened before and will happen again.
-
02-05-2009, 07:44 AM #5
-
02-05-2009, 10:17 AM #6
ya im getting a dyno tune after all the work is done. I bought the CAGS a while back and just havent got around to putting it in. So your saying to adjust the fans after the stat is put in? Also what would be a good brand for the panhard bar and lca brackets. I want quality before cost. Thanks for the input
-
02-05-2009, 03:36 PM #7
Whats the diffrence in the NGK TR55-lX plugs and the NGK TR55? Anyone have any recomendations for the wires as well?
-
02-05-2009, 05:46 PM #8
spohn or BMR both make good high quality pieces. I personally run mostly UMI stuff with some bmr stuff mixed in. All the UMI pieces I have look extremely good and are cheaper. I don't have any Spohn stuff and can't really comment on them so maybe someone that does will chime in. I *think* BMR is the only one to offer bolt in lca brackets but I could be wrong on that. Seems like I saw some UMI bolt in brackets recently.
Yes, if you put a cooler stat in adjust the fans down to take advantage of it.
the IX plugs are iridium plugs where as the tr55's aren't.
-
02-05-2009, 06:30 PM #9
-
02-05-2009, 06:43 PM #10
I run the regular tr55's in mine and haven't had any issues with them. I run MSD wires which is a popular wire. I think my next plug change I'm going to give autolite's a try. I hear tons of good stuff about those plugs.
-
02-05-2009, 06:50 PM #11
-
02-05-2009, 06:56 PM #12
yes, you are missing the hooker.... always get a hooker
-
02-05-2009, 08:35 PM #13
- Join Date
- Sep 2007
- Location
- Philly+Glenmoore, Pa
- Age
- 35
- Posts
- 4,703
Pewter Metallic- 2002 Trans Am WS6 M6 D1SC
Sounds like you got a good mod list going.
If you want quality before cost I would go with the UMI boxed 2pt weld-in SFCs cause they 'll be stronger and you wont have to worry about any bolts coming loose.
I have them on my car and I felt a big difference with them.
Also like Orion said make sure you get LCA relocation brackets since you're lowering it; UMI makes a bolt in set. Maybe even consider getting new LCA's while you're at it. I have UMI non-adjustables only cause they were cheap. Look into their adjustable ones.
Id recommend doing shocks and springs at the same time too. Koni's and Strano springs are what I'm gonna go with.
Last thing. You can buy MSD wires and the NGK-TR55s together as a package deal on LS1tech or on WS6store.
In fact you can find all these mods at http://www.ws6project.com/user_stor/...13bcd70c0f510c.
-
02-05-2009, 09:30 PM #14
so does KY Speed and Summit ( sponsors)
-
02-05-2009, 09:46 PM #15
- Join Date
- Sep 2007
- Location
- Philly+Glenmoore, Pa
- Age
- 35
- Posts
- 4,703
Pewter Metallic- 2002 Trans Am WS6 M6 D1SC
-
02-05-2009, 10:26 PM #16
ya it says ws6store.com sponsors us
-
02-06-2009, 06:26 PM #17
-
02-06-2009, 06:40 PM #18
-
02-06-2009, 06:55 PM #19
- Join Date
- Aug 2007
- Location
- Corn and Soybean fields
- Posts
- 5,483
Gray/ White- 09Ram 1500 83 Thunderturd
LS1s like a lil more heat 180 is good
-
02-06-2009, 07:21 PM #20
You not Italian at all!!! flag on the garage door is amazing. Haven't touched my thermostat. any other engine i would change it out. well see, if it were me, i would bypass the throttle body before i change the thermostat, but thats just me.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
need help??? ls1 missing
By ozmossis in forum LT1Replies: 1Last Post: 11-08-2010, 07:58 PM -
Missing Cat
By SteveCZ28 in forum Almost Anything GoesReplies: 7Last Post: 09-02-2010, 02:18 AM -
Missing ?
By 97txaggie in forum General HelpReplies: 10Last Post: 06-18-2010, 05:36 PM -
Missing Something?????
By predator506 in forum Camaro / SSReplies: 18Last Post: 11-07-2007, 02:10 PM -
What am I missing?
By slims00ls1z28 in forum Request and FeedbackReplies: 1Last Post: 07-01-2007, 11:04 AM
Bookmarks