Results 1 to 15 of 15
Thread: 450 hp?
-
10-29-2009, 06:26 PM #1
450 hp?
K so me and my dad are arguing about my car he is into his old school stuff has a 82 vette with 383 stroker.
is it possible to get 400-450 hp out of my car with out crank, rods, pistons,
stock heads but with better springs and push rods intake manifold and the rest bolt ons?
Let me know what you think
oh yea its 1 98 camaro m6
-
10-29-2009, 06:28 PM #2
-
10-29-2009, 06:46 PM #3
400-450rwhp or crank hp? If its at the crank then ya thats pretty easy, just can do full boltons and a good tune and you'll be over 400 at the crank. If its rwhp then he would need h/c/i and tuned to get that.
-
10-29-2009, 07:46 PM #4
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
H/C/I/ and good tune FTW.
-
10-29-2009, 07:58 PM #5
-
10-29-2009, 08:06 PM #6
- Join Date
- Aug 2007
- Location
- Corn and Soybean fields
- Posts
- 5,483
Gray/ White- 09Ram 1500 83 Thunderturd
The right cam cam only and a good tune will break 400 to the wheels in an M6 car
-
10-29-2009, 08:10 PM #7
ms4 cam with fast 92 will get ya over 400
-
10-29-2009, 08:30 PM #8
-
10-29-2009, 08:38 PM #9
- Join Date
- Jun 2007
- Location
- Parma Heights, Ohio
- Age
- 34
- Posts
- 889
SOM- 99 Trans Am
without upgrading the internals such rods pistons and crank, its not that hard. Cam only its possible to crack 400rwhp with the right supporting bolt ons and a real nice tune. Add heads to the mix and youll be over 400 almost for sure. the internals you listed do not have to be touched.. and are good for even more power.
99 TA-T56 swapped, Lid, TB Bypass, LS6 Intake, !EGR, !AIR, Custom Cam, Mids, O/R-Y, 3:73s, Cutout, Flowmaster.
A4 numbers w/ mids only 320RWHP 333RWTQ
Cam numbers and track times soon.
98 NBM Hardtop Formula- Bone stock, A4, 187,000 miles
13.8@ 103 2.1 60' 1357 DA
-
10-29-2009, 08:45 PM #10
what numbers does he say his 82 vette puts down, they're most likely inflated
-
10-29-2009, 08:48 PM #11
-
10-29-2009, 08:53 PM #12
with no crank, rods or pistons you aint goin anywhere
-
10-29-2009, 08:54 PM #13
With no real numbers or actually 1/4 times makes this a hard one to call. Im sure from a dig, unless he has slicks, he will have a real hard time getting that power to the ground.
-
10-29-2009, 09:06 PM #14
-
10-29-2009, 09:11 PM #15
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks