alignment adjustment locations

[mrr23]

seeing as i am an alignment/suspension guy, i decided to take pictures of where the adjustment points are.

rear camber adjustment point uses 21mm socket/wrench



rear toe adjustment point uses 21mm socket/wrench



front camber - install a 10mm x 1.5 bolt and tighten until it touches the strut. loosen strut to spindle bolts. tighten adjusting bolt to adjust camber more positive. loosen to adjust camber to more negative.



here is the view through the wheel



front toe - loosen jam nut with 24mm wrench. turn inner tie rod to set toe.