Just Installed Pacesetter Lts!!

**00maroz28** · 05-02-2007, 12:52 PM

pacesetter long tubes into pacesetter ory into borla(the quiet one)... couple of things
1. sound great
2. great clearance
3. had to buy an after market o2 sensor on drivers side because the stock ones are too long and they hit the transmission(a4) cable when in park..not good..actually a poor design because there is plenty of space for it but pacesetter just put the port in a horrible spot... or they could have just angled it one way or the other.

4. the drivers side of the ory is flat on top for a good tuck and clearance...however it hit the floor board..so had to heat it a little and flatten it a little more

5. last but not least they come with the worst clamps ever..they are dogshit! had to go buy 3" band clamps

I guess the lesson goes.... YOU GET WHAT YOU PAY FOR!

but all in all im happy with them

**Z28pwrHecz** · 05-02-2007, 01:01 PM

where did you get the headers from .. and what brand of y-pipe.

**00maroz28** · 05-02-2007, 01:15 PM

Originally Posted by Z28pwrHecz

where did you get the headers from .. and what brand of y-pipe.

from LMPERFORMANCE.COM and the ORY is pacesetter and desi=gned specifically for those headers

**Z28pwrHecz** · 05-04-2007, 07:46 AM

im going with the pacesetter lt aswell but with a tsp ory. i havent really heard any complaints on the tsp ory.

**First Spray777** · 05-04-2007, 01:14 PM

was the install hard? im plannin on sum PS LTs n then making them a true dual 2 an X...then dumping them

**boxmonkeyracing** · 05-06-2007, 09:29 AM

Originally Posted by First Spray777

was the install hard? im plannin on sum PS LTs n then making them a true dual 2 an X...then dumping them

I'm planing on doing the PS LTs to a TD with X when I get back from this deployment. should be interesting.

**00maroz28** · 05-06-2007, 07:12 PM

Originally Posted by First Spray777

was the install hard? im plannin on sum PS LTs n then making them a true dual 2 an X...then dumping them

everything went right in...except..if your keeping your egr...you may have to bend that pipe that goes from the egr to the passenger side header...i have the headers with egr..but due to not wanting to brake the egr pipe i just took it off... overall easy install.... just have to figure out solution for the y-pipe hitting the floor board

**Speedy_Gonzales** · 05-06-2007, 07:14 PM

lets hear that bad boy asap

**00maroz28** · 05-07-2007, 04:21 PM

Originally Posted by rrgray8

lets hear that bad boy asap

ill try to get a sound bite on here very soon

**0rion** · 05-10-2007, 11:46 PM

here's my pacesetters through a flowmaster and then with the cutout open. It's in the garage so the sound could be a little better.

**bigjpyn** · 05-10-2007, 11:55 PM

Hey guys i had installed my pacesetter longtubes also but with a tsp catted why, and my car is stock ride height and my ground clreance is garbage, but the headers did make a nice gain, if you guys want i have a post about headers i can get for a good price, i can get those stanless steel obx for a great price, comes with everything ten peice kit, but i love my ps

**99DROPTOPZ** · 07-16-2008, 08:21 AM

I love my pacesetters LT's! I have great ground clearance I saw awesome power gains. I had the ory pipe from pacesetter as well and it used to hit the floorboard but it went away after time. Sounds great through flowmatser too. I get a lot of compliments everywhere I go on the sound of my exhaust. I'm going to install a QTP cut-out real soon can't wait to hear them opened up. Flowmaster does dampen the sound a lot, should be a huge difference.