Looking for 2010-13 instrument cluster IP pinouts

**MacEwen** · 02-01-2013, 01:37 PM

Hi All,

I currently working on a few ideas regarding the cluster of 5th gen Camaros. I literally just got started.

Would anyone happen to be able to post, PM, or email diagrams or schematics, pinout charts, etc related to the Instrument Panel (IP)? No amount of information would be too much, or too little. Perhaps this could contribute to future sticky.

Thanks in advance!

-Ryan

**konigandy6** · 02-04-2013, 05:29 AM

Well I can't seem to get you any help from GM service info. Probably the case with the Camaro like most all other GM vehicles, the gauge cluster is unserviceable at the dealer, so they don't even bother giving you schematics or diagrams, because we'll never have one apart. We test them, if they fail, we replace the whole unit.

**MacEwen** · 02-04-2013, 06:14 AM

konigandy6,

Im pretty sure schematics will be a challange. lol. how about pinouts of the 20 pin connector? My Helm materas are admittedly only current to 1994. They typically supply this info. i mean a harness must be troubleshooted on occasion. For the moment id be happy getting it lit up. thanks for your efforts. I have found that not all the leds are in parallel. Its `unique` for sure.

**SiggyZ** · 02-04-2013, 07:16 AM

Is it relatively easy to remove the plastic cover to clean out some dust that collects?

**pajeff02** · 02-04-2013, 05:36 PM

I did some hunting on the intrawebs and didn't come up with anything. You'll probably need to find someone that has the full set of factory service manuals.

**konigandy6** · 02-05-2013, 05:05 AM

Originally Posted by pajeff02

I did some hunting on the intrawebs and didn't come up with anything. You'll probably need to find someone that has the full set of factory service manuals.

All factory service manuals are online. And I've already searched them to no avail.

**SiggyZ** · 02-05-2013, 05:36 AM

You've searched them on removing the cover to the gauge cluster?

Originally Posted by konigandy6

All factory service manuals are online. And I've already searched them to no avail.

**konigandy6** · 02-05-2013, 06:17 AM

I lied... I found something:

**pajeff02** · 02-05-2013, 05:20 PM

Yikes. Looks like they are not giving the pinouts for the gauges. It's all contained within a non-serviceable board by the looks - shows power, ground and then up/down arrows for the engine data stream to the gauges. Weird.