Supercharged LS1 Stroker

**rewerked17** · 07-16-2011, 12:58 PM

If this question is posted in the wrong thread please redirect me. Down to it, looking to buy a Corvette (97-04) in the next few months. Mainly because its a two seater and fairly familiar with the motor. Owned an ''00 TA for five years and wanna get another LS1 Car, but love the idea of a true two seater What im wanting to do is stroke and supercharge it. Wanting to try achieve at least 500hp to the ground and daily driver if possible, any advice on best approach and any experience out there as to how to aproach, best setups, what to stay away from etc... Any help would be appreciated. Also would I be better off with this type of build on an F-Body. Thanks

***Ed Blown Vert*** · 07-16-2011, 01:30 PM

Procharger should be able to get you there. Make sure you have a good fuel system.

**rewerked17** · 07-18-2011, 12:40 PM

Any real advantage goin with a Z06 or am i just waistin the money i could rebuild the regular coupe with?

**FasstChevys** · 07-19-2011, 02:23 AM

Originally Posted by rewerked17

Any real advantage goin with a Z06 or am i just waistin the money i could rebuild the regular coupe with?

The Z should have a little better handling - but I think you could get to 500 horse to the wheels with a regular LS1 fairly easy with an 8 psi ProCharger set up, as Ed said. You won't even have to stroke it to do so.

**woodymaro** · 07-30-2011, 07:38 PM

You might take into consideration his elevation as well.

**zeetwentyeight** · 07-31-2011, 01:22 AM

Just stroke it

**35th-ANV-SS** · 07-31-2011, 10:34 PM

I put down 500rwhp on 8psi with my Procharger D1SC. Running FMIC and Meth. Stock heads and cam. 2002 Camaro SS.

**Pontiaco** · 08-28-2011, 06:19 AM

hey 35-any, did you had to remove your a/c or p/s to make room for the charger, do you have a part number for that kit?
I'm lookig at allmy options before I spend my$$$, I look at the procharger web site but they dont list price!

**35th-ANV-SS** · 08-28-2011, 07:51 AM

Originally Posted by Pontiaco

hey 35-any, did you had to remove your a/c or p/s to make room for the charger, do you have a part number for that kit?
I'm lookig at allmy options before I spend my$$$, I look at the procharger web site but they dont list price!

Go to the forced induction portion of this site. The very top thread is my build thread. It has pictures and part numbers of everything. It also shows everything that was installed.

I did not have to remove anything from the car other than the front bumper support, but that was because I went with a front mount intercooler.