Didn't know they made one for f-bods

**Shermanator86** · 10-17-2007, 05:20 PM

does anyone know if this is a kit or someone buy a vette setup and make it work?

**KyleLs1** · 10-17-2007, 05:34 PM

there is a kit, i believe you have to modify the upper cowling or w.e its called so that the blower will fit underneath.

**ls1_doc** · 10-17-2007, 06:52 PM

Yeah its from lpe i believe. One of the guys that used to work for linginfelter.

**ProwlerZ** · 10-17-2007, 07:43 PM

www.lmspeed.com

**KyleLs1** · 10-17-2007, 07:49 PM

big dollars

**Shermanator86** · 10-17-2007, 07:50 PM

Originally Posted by KyleLs1

big dollars

uh yeah, thats almost as much as i paid for the car

**Websy21** · 10-17-2007, 07:52 PM

That looks like username badmonkey off of LS1TECH he had a huge thread on that build. There were allot of things he had to troubleshoot/fix but he jsut finally got it all running good. Put down around 550/550 or something but was over 400tq at just over 2k rpms. Monster down low

**Shermanator86** · 10-17-2007, 08:03 PM

Originally Posted by Websy21

That looks like username badmonkey off of LS1TECH he had a huge thread on that build. There were allot of things he had to troubleshoot/fix but he jsut finally got it all running good. Put down around 550/550 or something but was over 400tq at just over 2k rpms. Monster down low

that wasn't on a stock motor i take it

**Websy21** · 10-18-2007, 07:06 AM

nope, check it out on LS1TECH, I even believe its on the first page in the FI section right now. Can't remeber what it consisted of but ya its built I am pretty sure wether its stock cubes or not

**Websy21** · 10-18-2007, 07:15 AM

Sometimes you just have to do it yourself, lol. Enjoy, its stock 346 with ported LS6 heads and custom cam. He had some bad oiling issues with the rings being one of the problem so he honed it and put in some -4cc dished pistons. So more of less, stock cube motor with cam and heads. I figured it was more impressive but didn't want to over emphisize on the car. He's well over 450tq at 2000rpm. Check it out, in his sig he's got a link to his car with more info too if you want.

http://www.ls1tech.com/forums/showthread.php?t=797244