Results 1 to 20 of 37
-
11-18-2006, 11:22 AM #1
- Join Date
- Aug 1999
- Location
- Arizona
- Posts
- 51,364
Black- 383 Procharged & N20 Vert
Black 1999 Blown Convertible A4
Forged 383 | ATI D-1SC
NX MAF Kit | 222/226 .585 115
AS Stage II 6.0L FI Heads
Moser 9" | 3.70 | Wavetrac | 35 Spline | Vigilante 3600
548.0 RWHP - 563.8 RWTQ - 10# - D1
666.0 RWHP - 734.2 RWTQ - 125 Shot - P1
Black 2009 Escalade Hybrid 4WD
-
11-21-2006, 03:33 PM #2
- Join Date
- Apr 2001
- Location
- Surf City, NC
- Posts
- 2,499
Black/Screaming Yellow- 99 S/C TA WS6 & 04 Cobra
Not good.
1999 Trans Am WS6 Black - Forged 346, P1SC (8psi), TH-400, and 12 bolt(3.73's)
10.29@129 w/1.60 sixty foot
2004 Screaming Yellow Mustang Cobra - Whipple 2.3, Exhaust, & CCW's...My DD
-
11-21-2006, 05:47 PM #3
ehh, that shit'll buff out
-
11-21-2006, 11:39 PM #4
-
11-22-2006, 11:43 AM #5
sorry to hear that sounds like you had a stout combination there
-
11-22-2006, 12:50 PM #6
- Join Date
- Dec 2005
- Location
- Mclean VA
- Age
- 43
- Posts
- 30
Silver- 02 Z28 Hard Top M6
Are you thinking about using a boost refrenced nitrous progressive controller. NX have a new system called Maximizer 2. It is very good.
-
11-22-2006, 12:56 PM #7
-
11-22-2006, 01:12 PM #8
-
11-22-2006, 01:15 PM #9
-
11-22-2006, 01:17 PM #10
sorry, took it the wrong way.
-
11-22-2006, 02:38 PM #11
yeah, I find myself driving around on low to empty a lot before I stop at a gas station. I should stop that, it's not too healthy.
-
11-22-2006, 02:49 PM #12
Were you spraying when it blew or just driving. If it was just driving, I didn't know it would do that.
Black 98 Z-28, whisper air lid, ported polished descreened maf, slp smooth bellow, modified tb, 04 gto plug wires, ngk TR6 plugs, Megan underdrive pulley, cold fusion nitrous kit, k&n, removed cats, glass pack , casper o2 simulators, 3.73 gears, Burnt up 4l-60e, drilled and slotted rotors,
-
11-22-2006, 02:54 PM #13
-
11-22-2006, 02:55 PM #14
-
11-22-2006, 03:00 PM #15
-
11-22-2006, 03:50 PM #16
dam, you gonna be over 700 RWHP on the next motor?
-
11-22-2006, 03:55 PM #17
- Join Date
- Aug 1999
- Location
- Arizona
- Posts
- 51,364
Black- 383 Procharged & N20 Vert
Thats my goal.
-
11-22-2006, 05:46 PM #18
- Join Date
- Dec 2005
- Location
- Mclean VA
- Age
- 43
- Posts
- 30
Silver- 02 Z28 Hard Top M6
The D-1SC should be able to put u at 750rwhp maxed out. It took me to 670-680rwhp on a dynojet and i was only running the blower at 50000 RPM.
-
11-22-2006, 05:47 PM #19
Here you go Ed....this should be your next block to build a good motor...
http://www.gmgoodwrench.com/GMPerfor...6454&engCat=ls
-
12-01-2006, 09:20 PM #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Nitrous w/Stand Alone Fuel
By LS1Jason in forum NitrousReplies: 2Last Post: 08-01-2009, 09:02 AM -
Nitrous Oxide Burn......OUCH
By FSANE in forum Almost Anything GoesReplies: 12Last Post: 11-19-2008, 11:21 AM -
nitrous wet shot with fuel cell
By jimmybling31 in forum NitrousReplies: 4Last Post: 02-17-2008, 11:11 PM -
WTB: Fuel Pressure & Nitrous Guages
By SSConceptz in forum Cowhands, Local Parts and Fish BaitReplies: 0Last Post: 04-28-2007, 07:25 PM
Bookmarks