Post Up Your Purge Pics!

[CWW17]

I'm looking for ideas on where to purge my soon to be installed nitrous kit (Thanks to Harris Speed Works) I'd like to see some of your set-ups, purge cloud, whatever! Thanks!

[98T/Aformula.]

I'm looking for ideas on where to purge my soon to be installed nitrous kit (Thanks to Harris Speed Works) I'd like to see some of your set-ups, purge cloud, whatever! Thanks!

Entered this for COTM but no luck this time around but here is my fav purge pic !!!



Small purge, Colorado winter and high alt its hard to get a good stream going sometimes

[CWW17]

That's badass dude! What mods are you running and how much are you putting down?

[98T/Aformula.]

That's badass dude! What mods are you running and how much are you putting down?

Many bolt ons, Lts, Oryp, qtp electronic cut out, 3.73s, slps cold air pkg, ls6 intake manifold, sfc, and many more. I have never had my car on the dyno but a rough guess would be 340hp to the ground off the bottle and for sure over 400hp to the ground on the bottle with the 100 shot.

[CWW17]

Very nice, We have pretty similar mods... I was thinking I was at or around 350... plus the 150 shot... Magic number 500! I hope!

[98T/Aformula.]

Could be around 350 not to sure we will see once I go to the track I can make a better guess at what kind of power I have with my trap speed. You know if your going to go buy that vett yet ? Im pretty sure I saw you post that up somewhere ?

[mrr23]

[CWW17]

That is awesome mrr23! Looks like a 'W'... And 98T/A I'm not 100% sure. We got hit pretty hard with some winter weather here and I was planning on making the trip north to Wisconsin this weekend but now I don't know. Also I don't even know for sure whether he has the car yet. The car is on a trailer coming from Seattle. So whenever he gets it, I'm going to go check it out and make a decision!

[mrr23]

i did it that way to let them know who's fixing to 'W'in.

[98T/Aformula.]

i did it that way to let them know who's fixing to 'W'in.

And to put more N20 in the air then in you engine lol, just kidding man thats a crazy set up !

[Firebird Phoenix]

I saw a video of a Trans Am purging out the ram air hood nostrils, couldn't it be bad if the vehicle "breathed" in n2o in the intake.

[98T/Aformula.]

I saw a video of a Trans Am purging out the ram air hood nostrils, couldn't it be bad if the vehicle "breathed" in n2o in the intake.

No plus you usually dont purge while your moving and even if you did there is so much air flow that not much if any would go into your intake, plus when you spray your car your putting it in there anyway, overall it wouldnt do anything at all to your car....

[Firebird Phoenix]

No plus you usually dont purge while your moving and even if you did there is so much air flow that not much if any would go into your intake, plus when you spray your car your putting it in there anyway, overall it wouldnt do anything at all to your car....

Ok, I was just wondering if it would have some kinda adverse effect if some went in.

[Eagle]

Even if it did go in, it would pass through your MAF and the PCM would compensate with the appropriate fuel delivery accounting for the additional oxygen intake.

[02blkws6]

No show all go. I purge into the engine.....

[Fury_786]

<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i100.photobucket.com/player.swf?file=http://vid100.photobucket.com/albums/m9/Fury_786/SinisterPurge3-13-08.flv">

http://s100.photobucket.com/albums/m...rge3-13-08.flv

sorry, all i have is a vid.

[maxwax]

No show all go. I purge into the engine.....

FTW, Nitrous is my is the ace in the hole.

[greenTA]

I've always liked the single purge in the middle. There are some that shoot straight out of the front that look kind of cool too.