Results 1 to 5 of 5
Thread: nitrous vs stock stall
-
11-17-2007, 03:16 PM #1
- Join Date
- Sep 2006
- Location
- New Orleans
- Age
- 37
- Posts
- 53
Red- 01 camaro ss
nitrous vs stock stall
i have a 01 ss a4 with lts, ory, catback, p&p tb, and a lid. My best time right now is a 13.2 with a 2.2 60. for christmas im getting lower control arms, relocation kit, and panhand bar. I've really been thinking about getting some nitrous. I want to start with a 75 but like everyone else problary going to end with a 150. My question is could i keep my stock stall?? Im only going to be spraying on the track and i only go to the track maybe once every 3 or 4 months. im a complete noob when it comes to nitrous because ive always said i would never use it but lately ive been reading and im starting to change my mind so any other help you guys can give would be appricated.
-
11-18-2007, 12:33 PM #2
- Join Date
- Jul 2006
- Location
- Glen Carbon, IL
- Age
- 45
- Posts
- 397
Silver- 2000 Camaro SS
Sure, you can keep you stock converter. I did this last year b/c I knew my tranny was going to go. I had 4.10 gears, headers, and tune and ran an 11.7. I am using a dry nitrous kit so I can spray it off idle. This year I had a new tranny and a vig3600 and ran an 11.3 with basically the same setup, but with less traction.
-
11-18-2007, 07:41 PM #3
- Join Date
- Sep 2006
- Location
- New Orleans
- Age
- 37
- Posts
- 53
Red- 01 camaro ss
what size shot was you using?
-
11-18-2007, 08:20 PM #4
- Join Date
- Jun 2007
- Location
- THE 405
- Posts
- 169
Black- 2007 Silverado
i run nitrous on my big heavy truck with a stock stall...it'll make your 60' better
2007 RCSB 5.3L
-
11-19-2007, 04:10 AM #5
i've used 150 on a stock stall many times. been 11.97 @ 117 all stock at that time. with as little use as you say you are going to be using, the converter will hold up fine.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: Nitrous plate kit and high stall converter
By stephen02ws6 in forum Parts Wanted / TradeReplies: 1Last Post: 02-15-2013, 05:22 AM -
nitrous stall
By 35thz28camaro in forum Automatic TransmissionReplies: 4Last Post: 10-12-2008, 10:04 AM -
stock ls1 and 3500 stall
By 30th290 in forum Automatic TransmissionReplies: 4Last Post: 06-27-2007, 06:51 PM -
Stock w/ 3400 stall converter VS stock 6 speed?????????
By greatwhiteZ28 in forum Camaro / SSReplies: 11Last Post: 03-04-2007, 01:02 PM -
Is my stall too loose for nitrous?
By Frankthetank in forum Automatic TransmissionReplies: 7Last Post: 01-20-2007, 08:19 PM
Bookmarks