more bottle position questions

**fast93ta** · 12-28-2007, 05:42 PM

would stright up and down be ok ,
becasue if you have the front of the bottle higer then the end there could still be some nos in the bottle but the tube is not getting to it , it wouldnt be alot but maybe enought for that one race you really wanna win . i have a trans am and i really wanna put it in between the seats but i just think that all the nos wouldnt be use if i do it like that

**jperkins812** · 12-30-2007, 06:08 PM

Mounting the bottle like the instructions say is the best way to get what you can out of a tank of nitrous. Once a bottle gets low enough then the nitrous is going to be cutting out on you because the pressure will be to low.

**LS2Tuner** · 01-01-2008, 09:59 AM

Originally Posted by fast93ta

would stright up and down be ok ,
becasue if you have the front of the bottle higer then the end there could still be some nos in the bottle but the tube is not getting to it , it wouldnt be alot but maybe enought for that one race you really wanna win . i have a trans am and i really wanna put it in between the seats but i just think that all the nos wouldnt be use if i do it like that

NO it won't funtion properly like that.

**mrr23** · 01-03-2008, 02:29 PM

if you are asking if they can be positioned like i have mine, then yes. they are tilted slightly forward with the siphon tube forward as well.

**rdmelton** · 01-14-2008, 05:26 PM

You can definitely put it between the seats. I would recommend making a board/plate to mount the bottle and shimming up the front. Check out my install:http://rdmelton.autoeducation.com/cars/ws6/nitrous.html

In case anyone cares, I actually used a level and measured the change in height over the length of the bottle and calculated the angle. By using the 2x4, it was pretty close to the recommended 15 degrees.