I just want a nitrous purge

**coupe00** · 02-13-2007, 06:34 PM

I just want to be able to purge for showcar purposes what do you think?

**mrr23** · 02-13-2007, 06:44 PM

up to you. zex sells a show purge kit.

http://www.zex.com/Products/PurgeKit...&Store_Code=ZX

**danziger** · 02-15-2007, 01:03 PM

Since my previous post "went missing"...

What do I think? DON'T DO IT!!!!!

**SSwt00SS** · 02-15-2007, 02:38 PM

yo, here, this should help you out!!! good luck...

http://www.ls1.com/forums/showthread...250#post604250

**DeadZ28** · 02-15-2007, 02:44 PM

Originally Posted by SSwt00SS

yo, here, this should help you out!!! good luck...

http://www.ls1.com/forums/showthread...250#post604250

I was just poking through and I saw my ad sweet. Thanks

**01Z28M6** · 02-16-2007, 09:15 AM

I have the zex single outlet purge kit installed and it works perfectly. It is connected to my already in place zex 82026 wet kit. The activation button couldn't be any cheaper though. A $5 replacement is highly recommended.

BTW, although some might want the purge kit for racing or show, it is a good idea to release the pressure when the nitrous valve is turned off. The line charge leaves pressure against the nitrous solenoid seal. Besides adding stress on the component if it were to leak with the residual pressure into the intake a destructive backfire could happen. When someone in another forum told of a $2900 backfire in the staging lane after the bottle valve was closed, I was sold on using a purge kit.

**camaronx** · 02-25-2007, 02:33 PM

I have a zex purge kit with dual purge outlets that run to 2 red leds and the zex rapid fire module. You can click on my link for pics--leds rapid fire but i have not run n20 thru them yet.