Results 1 to 10 of 10
Thread: HSW Sudden Impact 90mm
-
12-04-2008, 10:14 PM #1
HSW Sudden Impact 90mm
Anyone run this kit? I might be buying one and was wondering if this is good/bad run of the mill.... Any problems know.... also what else i will need?
HSW Sudden Impact 90mm EFI Wet Nitrous Plate Kit (90mm LS1 F-Body)
HSW Sudden Impact 90mm EFI Wet Nitrous Plate Kit (90mm LS1 F-Body) Description: LS1 F-Body complete 90mm EFI Wet Nitrous Plate Kit. Features full 360 degree perimeter style spray pattern for less turbulent intake charge compared to single/multi port spray pattern plates; please follow this LINK for a video showing the perimeter style spray pattern. This kit comes complete, ready to be installed. All electrical connectors are weather tight (heat shrinkable) and includes full color installation manual. Fully adjustable from 25 HP - 150 HP.
Components are Anodized Aluminum & Stainless Steel. Please see below for detailed pictures.
Kit Component Construction: Anodized Aluminum & Stainless Steel.
Please Note: Jetting is rated at the Rear Wheels (RWHP).
Quantity
Kit Contents
1 10 Lb. HSW Nitrous Bottle (Black)
1Pair of S.S. Quick Disconnect Bottle Brackets
1PowerMax 3-Port N2O Solenoid (.125 Orifice)
1PowerMax 2-Port Fuel Solenoid (.250 Orifice)
1HSW 90mm EFI Wet Plate (Anodized Aluminum)
1Misc. Hardware for Plate Installation (Anodized Aluminum | Stainless Steel)
1 4AN Bottle Nut (Stainless Steel)
1 20” (Inches) Blue S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Solenoid to Nozzle)
1 20” (Inches) Red S.S. Braided Hose (Fuel Rail to Solenoid)
1 16’ (Feet) 4AN S.S. Braided Hose (Main Feed Line)
2Blue AN to NPT Fittings
2Red AN to NPT Fittings
1WOT (Micro) Activation Switch & Bracket
1Arming Switch
140 Amp Relay & Harness
1HSW Nitrous Pressure Gauge (Mounts directly on Nitrous Bottle)
1Set of Solenoid Brackets (Hardware Included)
1Electrical Pack (Wire & all Electrical Connectors (Weather Tight)Black 2000 Trans am WS.6, P&P MAF & TB, TB bypass, Fernco, Volant CAI, EGR! and AIR!, Kooks 1 7/8" race headers, QTP ORY W/Dual E-cutouts, Spec 3 clutch, RAM master and slave cylinders, 20% tint, 2 Alpine 10's/Rockford 1200amp, Pioneer head-unit, Corsa Clones, Metallic Silver Stripes, TTMs,
-
12-05-2008, 12:52 PM #2
I just bought the 78mm version; mine will be in next week. If you can wait that long, i'll let you know.
-
12-08-2008, 06:16 AM #3
- Join Date
- Mar 2008
- Location
- Warminster, PA
- Posts
- 91
We sell quite a few of them. Jump over on LS1tech and you'll find plenty of happy users. Thanks.
Nick
-
12-08-2008, 06:19 AM #4
- Join Date
- Oct 2008
- Location
- Florida
- Posts
- 19
black- 2001 WS.6
the 78 version work like a charm. Just make sure you buy the kit and not just the plate.
for some reason you get the better plate with the kit and can only get it with the kit. their other plates are a bit different and don't flow as much for some reason.
-
12-08-2008, 06:56 AM #5
- Join Date
- Mar 2008
- Location
- Warminster, PA
- Posts
- 91
-
12-15-2008, 01:19 AM #6
is it gonna be dumb to run a 90 plate with a 92 setup? just curious cuz not finding many 90 setups
-
12-15-2008, 08:15 AM #7
- Join Date
- Mar 2008
- Location
- Warminster, PA
- Posts
- 91
We sell both 90mm and 92mm. If you're running a 92mm setup I would recommend running that plate size.
Nick
-
12-15-2008, 01:12 PM #8
-
12-15-2008, 01:32 PM #9
-
12-15-2008, 01:58 PM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: F.A.S.T 90mm INTAKE AND 90mm throttle body
By spooled88monte in forum Parts Wanted / TradeReplies: 0Last Post: 02-21-2008, 02:58 PM -
New 90MM LSX Fast intake & New Nick Williams 90MM Throttle Body for LS1 $1000.00 &shp
By harnick3 in forum Parts For Sale / TradeReplies: 5Last Post: 07-30-2007, 07:23 AM -
HSW Sudden Impact
By MavrickCJH in forum Parts ReviewReplies: 0Last Post: 01-11-2007, 12:21 PM -
90mm LSX or 90mm LS2 C6 Corvette intake manifold?
By waldo31031 in forum Forced InductionReplies: 4Last Post: 02-14-2006, 08:07 AM -
WTB LSX 90MM Intake and 90MM Throttle Body
By XtinKt in forum Parts Wanted / TradeReplies: 0Last Post: 01-25-2006, 01:59 PM
Bookmarks