Results 1 to 6 of 6
  1. #1
    JUISSED Midnight02's Avatar
    Join Date
    Feb 2007
    Location
    Atlanta
    Age
    43
    Posts
    661

    Navy Blue Metallic
    2002 Camaro SS

    First Death + Driver Mod = Kill

    A few nights ago I went to pick up the SS from Vengeance (making a few adjustments to the tune). On the way back I passed by a WRX and threw him a little rev as I passed him on the highway. He responded with a downshift and I got an earful of BOV.

    We both slowed down and he started to honk it off. I was planning to start in 3rd gear, however we kept slowing down and were around 50 mph at honk #1. I quickly ripped it into 2nd gear and the 3rd honk followed immediately thereafter. What happened next came as a surprise to me.....I roasted the tires and the rear end started to slide out and my new friend in the WRX was walking! I finally caught traction in 3rd and was able to stop his pull, however he still had a car length on my by 110 and we both slowed down.

    Now that I was much more aware of what I was dealing with (an apparently well modded WRX), I asked him if he wanted to go again. He obliged. We slowed to 45 mph and he honked it off again. I was already sitting in second gear this time and was wise enough to feather into the throttle at the start. He got about a fender-lenth jump on the third beep. I found traction and didn't spin at all and immediately started pulling. As I ran through 3rd I had a constant pull on him and I kept pulling even more as I went into 4th gear. By 120 I had an easy 3 lengths on him and then I slowed. We both slowed and exchanged a thumbs up and went on our way. No ricer flyby.

    While the car wasn't an STI, it did sound like it was pretty well modded....exhaust, bov, etc. although I'm not exactly sure to what extent. Given that my car is good for 11's N/A, I gather he must have a good bit of work done.

    One observation I had during the race, the gearing on those cars must be ridiculously tight....it seemed like he was just zipping though gears the whole time. I'm sure a higher ratio would help keep the turbo closer to full boost, however it just seemed like by the time he shifted into a gear and got to pull a bit in the band, he was already shifting to the next one. I have 3.90's and was running in third gear a great deal longer than he was. Given the outcome from a 45 mph roll, I can imagine this would've been a very tight race from a dig.

  2. #2
    Awaiting Activation
    Join Date
    Sep 2007
    Location
    Philly+Glenmoore, Pa
    Age
    35
    Posts
    4,703

    Pewter Metallic
    2002 Trans Am WS6 M6 D1SC

    Nice redemption! So what mods do you have?

  3. #3
    Bolt-On Pimp ImpalaSSpeed96's Avatar
    Join Date
    Apr 2007
    Location
    ND
    Posts
    360

    Black
    01 Camaro SS

    They are geared stupid tight. You can't go through the 1/4 in them w/out shifting into 5th....
    96 Imp SS- 12.74@103, 1.74 60' out of fuel

    06 AWD TB SS- 12.58@106, 1.76 60'

    01 Camaro SS- Totaled

  4. #4
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,777

    06 HD Softail
    1998 Trans Am m6

    sounds like a very good running wrx nice runs

  5. #5
    Just a souped up sunfire. Ryans99LS1's Avatar
    Join Date
    Jun 2007
    Location
    Parma Heights, Ohio
    Age
    34
    Posts
    889

    SOM
    99 Trans Am

    I rip through my friends WRX like mad. I always thought they had to be geared really tight too after driving it. When modded right they can hang.

    Good kill!

  6. #6
    JUISSED Midnight02's Avatar
    Join Date
    Feb 2007
    Location
    Atlanta
    Age
    43
    Posts
    661

    Navy Blue Metallic
    2002 Camaro SS

    Quote Originally Posted by TempleU_WS6 View Post
    Nice redemption! So what mods do you have?
    See sig below...

    H/C/I/E and all the rest of the goodies. I ran him without the bottle.
    2002 Camaro SS M6, 2.5 PRC 5.3L heads, TFS 228/230 cam, FAST 92, bolt ons + a 10 lb bottle in the back.


    1989 Corvette L98, A4, Full bolt ons, etc.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mach 1 kill and death
    By richard head in forum Kill Stories
    Replies: 9
    Last Post: 07-04-2008, 11:07 AM
  2. Daily Driver KILL '05 Toy Avalon vs SRT-4
    By 99DROPTOPZ in forum Kill Stories
    Replies: 18
    Last Post: 05-29-2008, 04:06 PM
  3. Ford Probe Kill(driver took a dump)
    By SVG210 in forum Kill Stories
    Replies: 3
    Last Post: 03-04-2008, 07:11 PM
  4. 1 kill and 1 death :)
    By blackhawk01 in forum Kill Stories
    Replies: 8
    Last Post: 01-27-2008, 10:16 PM
  5. kill and death: Anti-street racers stay out
    By Mike's02Z28M6 in forum Western Members
    Replies: 8
    Last Post: 02-16-2006, 06:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •