Results 1 to 6 of 6
Thread: Any HP estimate??
-
09-14-2007, 12:36 PM #1
Any HP estimate??
Hey guys, im wondering how much HP i have, but cant afford a dyno right now...Anyone with similar mods have any HP#s??
Mods:
SLP Lt,ORY,Magnaflow cat-back,K&N FIPK, Fast90/PTM90, Full suspension with SFCs.
This is getting ordered next week (only 1 more paycheck to go!):
http://texas-speed.com/shop/item.asp...d=204&catid=47
I need an estimated HP fo the above....
I also have a Zex HO wet kit currently set at 100shot but i dont need to know how much more that adds....
-
09-14-2007, 12:41 PM #2
-
09-14-2007, 02:15 PM #3
- Join Date
- Feb 2007
- Location
- Bakersfield, CA
- Age
- 42
- Posts
- 548
86 Buick Grand National- 02 WS6-M6 407 RWHP
I can't decide between those heads or PRC's LS6 heads without the h/c i'd say about 350 and with them installed i'd say at least 420 depending on what cam you go with. Check out my sig and you can see what kind of power i'm making with their 228r cam, i'm hoping to be at about 450RWHP with the heads.
Pacesetter Headers- ORY
Texas Speed 228R Cam/Moly Pushrods/918 Springs
MTI LID
Slp Under Drive Pulley
Texas Speeds Rumbler Catback
SFC's, Lakewood LCA's
Koni SA 4/3, Strano Springs
Dyno Tune
LS7 Clutch, Nitto DR's
407 RWHP 377 Ft./lbs.
-
09-16-2007, 04:28 AM #4
- Join Date
- Jul 2006
- Location
- indiana
- Age
- 41
- Posts
- 1,018
black, 05 Roush- black, 99 T/A WS.6
I personally would go with hogged out LS6 heads as opposed to the 5.3l heads. the 5.3l heads are good too but most guys get those when going forced induction as the 5.3l head is going to lower your compression.....I agree with said above I would say you are around 350-360 now. with ported heads and a cam in the mid 230 duration with healthy lift I would say you will be in the 450-470 range considering you have the 90/90 combo. I hope you already have a stronger rear end.
1999 T/A WS6 Black -------SOLD
05 mustang Roush sport;
DOB manifold, m122 SC, 47lb injectors, gt500 TB, roush TVS CAI, Detroit rocker SC grind camshafts, Mac LTs, off road x, roush off road mufflers, roush short throw shifter, kenne bell BAP, Brenspeed 93 octane tune. 479rwhp 436ftlbs SAE.
-
09-17-2007, 10:47 AM #5
-
09-21-2007, 09:45 AM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Can SOMEONE ESTIMATE HP#'s FOR MY SET !!!!
By jb3golf in forum General HelpReplies: 23Last Post: 03-09-2010, 08:49 AM -
Ss hp estimate help???
By khickenwang in forum Camaro / SSReplies: 18Last Post: 02-28-2010, 10:03 PM -
estimate of what i should put down?
By fordownsall in forum Dyno InformationReplies: 2Last Post: 08-26-2008, 03:15 AM -
Hp estimate?
By waldo31031 in forum Dyno InformationReplies: 7Last Post: 04-01-2006, 02:47 PM
Bookmarks