Classics Check in

Mongoose · 09-22-2005, 02:54 PM

really really

Mongoose · 09-22-2005, 02:54 PM

like the

Mongoose · 09-22-2005, 02:54 PM

tri 5

Mongoose · 09-22-2005, 02:55 PM

project

**toneloc60** · 09-23-2005, 06:20 AM

I know it's not all that uncommon to do an LS1 swap into a classic. What I'm doing, however, I have yet to see.

The idea is to mount the cradle to the '57 frame. Then, fabricate and weld two hoops to the frame to mount the McPherson strut front suspension. I'm also going to remove the rear subframe of the WS6 and weld it to the frame rails of the '57.

The interior is going to be fun. The interior of the WS6 measures out to be an inch and a half narrower than the '57. The '57 is 7" longer though. So, what I plan on doing is cutting the floorpan of the WS6 and stretching it the required 7" to make it fit properly. The 1.5" difference in the width doesn't concern me too much. It's really only the dash anyway. The extra space will allow a much neater, tucked away look for the roll cage.

It should be fun. The only thing that won't be a WS6 on the car will be the body. Otherwise, I'm using everything. The wiring, the computer, the suspension, the drivetrain, the interior, the stero and speakers... everything.

Mongoose · 09-23-2005, 07:12 AM

Originally Posted by toneloc60

I know it's not all that uncommon to do an LS1 swap into a classic. What I'm doing, however, I have yet to see.

The idea is to mount the cradle to the '57 frame. Then, fabricate and weld two hoops to the frame to mount the McPherson strut front suspension. I'm also going to remove the rear subframe of the WS6 and weld it to the frame rails of the '57.

The interior is going to be fun. The interior of the WS6 measures out to be an inch and a half narrower than the '57. The '57 is 7" longer though. So, what I plan on doing is cutting the floorpan of the WS6 and stretching it the required 7" to make it fit properly. The 1.5" difference in the width doesn't concern me too much. It's really only the dash anyway. The extra space will allow a much neater, tucked away look for the roll cage.

It should be fun. The only thing that won't be a WS6 on the car will be the body. Otherwise, I'm using everything. The wiring, the computer, the suspension, the drivetrain, the interior, the stero and speakers... everything.

I think it is a cool project and if you take your time it will come out well. My buddy Jon is doing the same thing. He is putting the HenryJ body on a SRT-4 Chasis. It should really fly when he gets it done.

**toneloc60** · 09-23-2005, 09:30 AM

That's going to be one bad Henry J. Hmmm.... That'd be hillarious to see the look on some poor ricers face if he beat 'em and then popped the hood.

Mongoose · 09-23-2005, 10:01 AM

Originally Posted by toneloc60

That's going to be one bad Henry J. Hmmm.... That'd be hillarious to see the look on some poor ricers face if he beat 'em and then popped the hood.

That's the idea, lol. Jon does custom turbo kits and plans on making about 500 FWHP and close to the same torque in a car that may weigh 2200lbs.

SOM 01 WS6 · 09-25-2005, 10:32 PM

76 firebirb. ram air 400. firethorn red single white racing stripe

**Corvettekid82** · 09-27-2005, 03:56 AM

1980 vette 350 hooker headers & side pipes.

**TransAmMan** · 09-29-2005, 04:49 PM

I have a 69 mach 1 with a non VIN motor and I'm STRONGLY considering putting atleast a ls1 in there when I restore it.

ws4transam · 10-13-2005, 05:42 PM

68 gto
69 camaro
70 cougar xr7
and 3 79 trans ams

hotstuff · 10-15-2005, 07:45 PM

I've owned a 73 pantera for 22years.

tex70 · 10-16-2005, 06:35 AM

i just sold my 1970 pontiac gto judge about 3 months ago, wish I didnt but I needed the cash. Now I have a project 1970 Oldsmobile HOLIDAY fastback, if anyone wants to buy it, it's a nice easy project. I will let it go for $1100.00 "FIRM"

**jksz71** · 10-21-2005, 08:58 AM

I'm a newbie, but have a classic. 79 Trans Am 56,000miles. basically a driver restoration. Can't post the pic yet, but will have a pic once the post count goes up.

**Mr. CarelessAndImprudent** · 10-21-2005, 09:24 PM

Wentzville huh, I'm in Rolla

ws4transam · 10-22-2005, 03:51 AM

my dad just bought a midnight blue 66 mustang with 66,3652 factory miles with the 200 small block motor

**jksz71** · 10-24-2005, 08:45 AM

Originally Posted by Mr. CarelessAndImprudent

Wentzville huh, I'm in Rolla

Yep, not too far away. I'm also a member of MOFBA who has a few members in Rolla.

**Mr. CarelessAndImprudent** · 10-25-2005, 09:05 PM

What's MOFBA

camaros4ever · 10-25-2005, 11:21 PM

I have my '71 SS 454 blown chevelle for sale, it needs to be put together I have 25K in repicits/new parts, look up my name under parts for sale if interested.

Also yes I love the Tri 5s too, a couple years ago I had a driver quality '57 chevy with a 283 power pack and a 3 speed manual with overdrive.