shift kit and cooler install

'00_Z · 10-10-2005, 10:38 PM

What is a reasonable price to pay for installation of a cooler and trans-pak or trans-go kit? And if I go with the kit in its "stage one" setting will it really affect trans reliability that much?

***Sarge*** · 10-14-2005, 04:09 PM

Lemme see....without digging through my mountain of mod receipts....
TransGo Shift Kit/B&M Cooler/Transmission temp guage/Complete flush and fill was about 7-8 hours of labor at $75 bucks per hour....

Zboner · 10-14-2005, 05:03 PM

do it, its worth the money but get a stall

02 Mag Red · 10-15-2005, 12:25 PM

Becareful with the shift kit , it broke my shift selonoid piston , shattered it because it is made of plastic . Than second gear started slipping , yes I have to rebuild the tranny . Now it is Built . Go easy on the second gear shift or replace the plastic piston

'00_Z · 10-18-2005, 12:11 AM

Thanks guys. I've got a SF3000 conv. and B&M cooler, but don't have the $$$ for the install yet. I'm considering doing a shift kit at the same time too.

10-10-2005, 10:38 PM	#1
'00_Z Junior Member Join Date: Aug 2005 Location: Saline,MI Age: 33 Posts: 23 2000 Z-28 Navy Blue Met.	shift kit and cooler install What is a reasonable price to pay for installation of a cooler and trans-pak or trans-go kit? And if I go with the kit in its "stage one" setting will it really affect trans reliability that much?

10-14-2005, 04:09 PM	#2
*Sarge* Let'sPartyLikeIt's1959 Join Date: Aug 2005 Location: Texas Department of Corrections Posts: 16,349 So many warnings we made him a mod	Lemme see....without digging through my mountain of mod receipts.... TransGo Shift Kit/B&M Cooler/Transmission temp guage/Complete flush and fill was about 7-8 hours of labor at $75 bucks per hour....

10-14-2005, 05:03 PM	#3
Zboner Senior Member Veteran Member Join Date: Aug 2005 Location: cincinnati/northern ky Age: 23 Posts: 9,004 99 SS Black	do it, its worth the money but get a stall

10-15-2005, 12:25 PM	#4
02 Mag Red Junior Member Join Date: Oct 2005 Location: Florida Posts: 35 02 Coupe Mag Red	Becareful with the shift kit , it broke my shift selonoid piston , shattered it because it is made of plastic . Than second gear started slipping , yes I have to rebuild the tranny . Now it is Built . Go easy on the second gear shift or replace the plastic piston

10-18-2005, 12:11 AM	#5
'00_Z Junior Member Join Date: Aug 2005 Location: Saline,MI Age: 33 Posts: 23 2000 Z-28 Navy Blue Met.	Thanks guys. I've got a SF3000 conv. and B&M cooler, but don't have the $$$ for the install yet. I'm considering doing a shift kit at the same time too.