|
|
10-09-2005, 09:55 PM
|
#1 |
|
Junior Member
Join Date: Aug 2005
Location: Arlington, Texas
Posts: 68
2000 Camaro Z28 A4
Navy Blue Metallic
|
Sender for trans temp guage
What kind of fittings do I need to mount the sender in the pan? Any other options ?
|
|
|
|
10-15-2005, 05:02 PM
|
#2 |
|
Retired NOT tired
Join Date: Jul 2005
Location: Poway, Ca
Posts: 656
2001 Z28 (Sara)
SOM
|
If it is an automatic transmission, there is a pressure port on the side of the case above the transmssion linkage, the size is 1/8 NPT. I get very accurate readings from that location.
SteveC 
|
|
|
|
|
10-19-2005, 10:24 PM
|
#3 | |
|
Junior Member
Join Date: Aug 2005
Location: Arlington, Texas
Posts: 68
2000 Camaro Z28 A4
Navy Blue Metallic
|
Quote:
Is there tranny fluid at that location? I don't want to read case temp. |
|
|
|
|
|
11-13-2005, 08:55 PM
|
#4 |
|
Retired NOT tired
Join Date: Jul 2005
Location: Poway, Ca
Posts: 656
2001 Z28 (Sara)
SOM
|
I really do not know the answer to that, however the reading I get there is within 1 degree of what auto tap says it is.
SteveC
|
|
|
|
|
11-14-2005, 05:27 AM
|
#5 | |
|
Member
Join Date: Aug 2005
Location: any where but here
Posts: 142
|
Quote:
Yes, there is. There was fluid on the plug when I removed it to mount the sender in that location. |
|
|
|
|
 |
| Bookmarks |
 |
 |
 |
| Thread Tools | |
|
|
