Procharger (Reliable High Power Kit)

[fierce-ls1]

I am selling my ATI Procharger Supercharger. The kit I am selling includes the basic kit that Procharger supplies + Extra High Performance Reliable Parts that is capable of producing 700+ RWHP on a stock car.

Kit List

1. ATI Procharger Factory Kit
   
   • Includes P1SC Head Unit (CARB Legal)
   • Includes all ATI factory brackets, tubes, frames, hoses, hardware, etc
   • Includes ATI supplied twin-Fan and all mounting supplies.
   • Includes ATI supplied Air Bypass System
   • Includes several pullies for different levels of boost ($80 each@ATI)
   • Includes Three (3) ATI Procharger Oil Tubes
   • Includes 6 rib setup
   • Includes ATI Crank Pinning Kit ($100@ATI)
   • Includes SVO 42 LB Green Injectors (going for $200 - $250 used)
   • Pics of Factory Kit + Injectors
     
     
     
     
     
     
     
     
     
     
     
     
2. ATI Procharger Race Bypass with Custom Flange
   
   • Guaranteed not to leak under high boost
   • Wind-Tunnel Noise / Effect (Blow-Off Valve)
   • Bypass alone without custom flange is more than $300 from ATI
   • http://www.racingjunk.com/post/71380...s-2200-HP.html
   • Pics of ATI Procharger Race Bypass and Custom Flange
     
     
     
     Compared to Junk Factory Supplied ATI bypass
     
   
   
   
3. SDCE 8 Rib Tensioner Kit
   
   • Retails for $675 plus shipping
   • Can take the Procharger P1SC to 700+ RWHP
   • Reliable Tensioner System (Non Slip)
   • 8 Rib Design is an upgrade from the 6 rib setup
   • Ability to loosen / tighten the tension
   • www.sd-concepts.com/LS1.htm
   • Pics of the SDCE 8 Rib Tensioner System
     
     
     
     
     
     
     
   
   
   
4. SDCE Tensioner Tool
   
   • Retails for $45 + Shipping
   • www.sd-concepts.com/LS1.htm
   
   
   
5. OBX Front Mounted Intercooler (FMIC) - New
   
   • Retail price of $300, ebay around $250 + Shipping
   • Cools down air better than Procharger supplied twin intercoolers
   • Front Mounted Location
   • Pics of OBX FMIC
     
     
     
     This is where it would go on a car
     
     
     On a TA
     
     
   
   
   
6. Innovative Turbo Silicone Transitions / Hoses / Clamps - New
   
   • Comes From Innovative Turbo In Simi Valley, CA
   • http://www.innovativeturbo.com/pages/contact_us.asp
   • Works with OBX Intercooler and Throttle Body - Correct Transitions
   • Aircraft Quality Clamps - Will not leak under high boost
   • Retails for $150
   
   
   
7. ATI Super Damper with Air Conditioning (AC) Provision
   
   • Recommended for high horse power / FI setups
   • Retails for $450 New
   • http://www.thunderracing.com/catalog...vid=3&pcid=112
   • Pics of Super Damper with AC
     
     
     
   
   
   
8. True Tech Performance Steel Procharger Bracket
   
   • Will Not bend under high boost applications - Eliminates Flexing
   • Paid $150 or maybe $175 for this.
   • Pics of TTP Steel Bracket vs ATI supplied bracket
     
     
     

I added up just the cost of the extra / upgraded parts not including the SVO 42 lb Injectors and the ATI Crank Pinning Kit and not including the Procharger Kit and it's value is over $2000.

I can give away the entire kit including the factory ATI Procharger Kit, ATI Race Bypass, Custom Flange, SDCE Tensioner System, SDCE Tool, OBX Intercooler, ATI Damper with AC, Innovative Turbo Transitions, the SVO injectors, the pinning kit, and the other upgrades for $4250. If you were to purchase all of this now new, it would be double this price or more ($8 - 9K).

There are a few parts in here that you could sell as well and make some money off of it including the dual intercoolers and the stock ATI bracket. You can also sell the upgrades and make money off of it. I just want to get rid of this entire kit for $4250. I live in Southern California. I can drive 250 miles to meet someone.

[gsusmx]

So this fits on a 98 camaro ls1 ? can you ship this item to mexico using ups dhl or fedex thank you

[fierce-ls1]

So this fits on a 98 camaro ls1 ? can you ship this item to mexico using ups dhl or fedex thank you

Yes it would fit a 98 ls1 camaro. However, I would not be able to ship to Mexico. I would be able to drive to San Diego though and meet you at the border.

[gsusmx]

please try to add me to msn im online to see that border stuff chuytec@hotmail.com ty

[MillerTime]

great buy on the procharger. wish i had the dough. but i have to ask what is the color of that TA????? looks like a money green. is it a rare color?

[fierce-ls1]

Sold pending funds. That color I believe is a rare teal green or chamelion color ... something like that. A guy on ls1tech owns that car.

[Kev98Ta]

Yeah, thats NA$TY-TA's car. Color is Bright Green Metallic. We're 1 of 98.

[98 Gold Formula]

Bright Green Metallic 98 only color

[Transam 98]

Is this sold???

[fierce-ls1]

Sold pending funds. I'm meeting up with the buyer on Saturday.