Results 41 to 50 of 50
Thread: Mustang killa
-
10-16-2006, 06:58 AM #41Evr sena bdgr killa snak?
- Join Date
- Dec 2005
- Location
- Research Triangle Park, NC
- Age
- 46
- Posts
- 1,811
Pewter- '99 Z28 M6
Originally Posted by Angus66
Based on numerous dynos of stock Mach 1's, it seems that Ford under rated
both the '03 & '04 Mach 1's by just a bit:
Based on 15% driveline loss, the above Mach 1 produced ~ 331 horsepower & 360 ft lbs of torque at the flywheel.
'96 - '98 Cobras - rated at the same 305 hp by Ford - typically dyno @ 250 - 260 rwhp, which is roughly 305 crank hp.
That torque curve looks nasty for both. Talk about a drop off. Where's the beef after 5K?
Actually, both curves look real nasty and not smooth at all.
-
10-16-2006, 07:29 AM #42'03 Mach 1
- Join Date
- Aug 2005
- Location
- PA
- Age
- 57
- Posts
- 74
Grey- 2003 Mach 1
That's typical of a small displacement, OHC engine. Remember, it's only 281 cubic inches. Originally Posted by Roastem
No matter how smooth the Mach 1 torque curve looks (or doesn't),
it was good-enough for mid-11's @ 117+ mph yesterday - Mach 1 11.55 N/A runLast edited by Angus66; 10-16-2006 at 07:56 AM.
-
10-16-2006, 10:01 AM #43Evr sena bdgr killa snak?
- Join Date
- Dec 2005
- Location
- Research Triangle Park, NC
- Age
- 46
- Posts
- 1,811
Pewter- '99 Z28 M6
Nice numbers!
Too bad I can't see the vid here at work...
And too bad I can't line 'em up with ya next time at the track, that is really disappointing.
What was your 1/8 mile time and trap?
-
10-16-2006, 11:12 AM #44'03 Mach 1
- Join Date
- Aug 2005
- Location
- PA
- Age
- 57
- Posts
- 74
Grey- 2003 Mach 1
The 1/8th mile ET was 7.360 & the trap was 93.53 mph. Originally Posted by Roastem
-
10-17-2006, 04:40 AM #45Evr sena bdgr killa snak?
- Join Date
- Dec 2005
- Location
- Research Triangle Park, NC
- Age
- 46
- Posts
- 1,811
Pewter- '99 Z28 M6
Man, I need some slicks...
-
10-18-2006, 11:42 AM #46Member
- Join Date
- Aug 2006
- Location
- california
- Posts
- 123
allllllllll black- 2002 35th z28
331 Flywheel Hp Get You Into Mid 11's------shut Up.....
-
10-18-2006, 11:47 AM #47Member
- Join Date
- Aug 2006
- Location
- california
- Posts
- 123
allllllllll black- 2002 35th z28
Can A Cam Only Ls1 Near This Mach 1 Pos.....please Race This Guy To Rid Him Of His Bullshit Problem....
-
10-18-2006, 12:26 PM #48King 0f n00bz
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
simmer buddy or the Originally Posted by unnatural aspirations
and kick your angry ass off and no one wants that...lol you gotta watch..you have more warning then my computer after i get done looking up porn
j/k
mods- suncoast creations hood with functional lt1 style airbox, ls6 intake, QTP longtube headers, QTP ORY, UMI SFC, Adj. LCA with relo brackets, UMI adj. panhard bar, Koni SA and strano springs,Torq Thrust M 17s 9.5 and 10.5 with nitto 555Rs, tuned by Frost
Originally Posted by Modulistic
-
10-18-2006, 02:45 PM #49'03 Mach 1
- Join Date
- Aug 2005
- Location
- PA
- Age
- 57
- Posts
- 74
Grey- 2003 Mach 1
Who said I have 331 crank hp currently? Originally Posted by unnatural aspirations
The video I posted speaks for itself...
I'd be happy to race a cam-only LS1 at either Maple Grove or Atco. Originally Posted by unnatural aspirations
-
10-18-2006, 03:03 PM #50Senior Member
- Join Date
- Jul 2005
- Location
- orlando, fl
- Posts
- 7,364
black- 2014 camaro 2ss/rs
Originally Posted by unnatural aspirations
how about you do the same. no need for a reply.Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
COP killa??!??
By wes89gt in forum Kill StoriesReplies: 6Last Post: 03-08-2006, 06:09 PM
Bookmarks