True Dual exhaust read me. pics/and share your information.

[0rion]

That is exactly what I did with mine. Good call Orion.

thanks, it looks like they welded his hangers in that position though so unless he breaks the welds or cuts the old hangers off and welds on new he's kinda stuck in that position. The turndowns should always have some angle on them or they'll beat against the ground like a drum.

[FuhBreezeE]

thanks, it looks like they welded his hangers in that position though so unless he breaks the welds or cuts the old hangers off and welds on new he's kinda stuck in that position. The turndowns should always have some angle on them or they'll beat against the ground like a drum.

Well looks like that's my only other option besides a catback... thanks for the info

[Zboner]

personally i would go with the CB amd do a cutout after each header, thats the way im going.

[Mr. Luos]

personally i would go with the CB amd do a cutout after each header, thats the way im going.

This will normally lose a couple tenths for most cars....when the cutouts are open anyways.

[Zboner]

This will normally lose a couple tenths for most cars....when the cutouts are open anyways.

true some people like the sound

[Heartbreak1]

true some people like the sound

Im thinking right now I mise as well just keep my stock catback and throw a putout on it until we move to Texas, then I can get my TD's done.

As far as the beating drum thing goes, I thought that was a good thing because then you could set off car alarms.

[FuhBreezeE]

Im thinking right now I mise as well just keep my stock catback and throw a putout on it until we move to Texas, then I can get my TD's done.

As far as the beating drum thing goes, I thought that was a good thing because then you could set off car alarms.

DJ and I parked in a covered parking lot last night, when we left to go run we must've set off about 3-4 car alarms just when we started our cars up!

[Heartbreak1]

DJ and I parked in a covered parking lot last night, when we left to go run we must've set off about 3-4 car alarms just when we started our cars up!

[Mr. Luos]

DJ and I parked in a covered parking lot last night, when we left to go run we must've set off about 3-4 car alarms just when we started our cars up!

Should hear mine right now.

[Heartbreak1]

Should hear mine right now.

+1

[9t8z28]

i think he ment a continous bend, where yours is welded i can see

I don't get it?

[Heartbreak1]

I don't get it?

Continuous bend is one long pipe. His is welded which means its in sections.

[9t8z28]

Continuous bend is one long pipe. His is welded which means its in sections.

You can do it either way. Trust me, I can do it any way, and I have done it.

[Zboner]

ok, i didnt say that it could not be done.

[Heartbreak1]

You can do it either way. Trust me, I can do it any way, and I have done it.

I was just clearing up the confusion, wasn't saying you can't do it one way and do it another.

[9t8z28]

I was just clearing up the confusion, wasn't saying you can't do it one way and do it another.

O.K., I never said you did?

[Zboner]

i like my duals, sounds great, but there are 2 CB's that I really like and are prolly going to switch over to when the funds are available, because im tired of low clearance

[9t8z28]

i like my duals, sounds great, but there are 2 CB's that I really like and are prolly going to switch over to when the funds are available, because im tired of low clearance

What exhaust setup do you have now?

[Zboner]

its set up for drag racing. the pics are back on page 4 in the middle, im the silver car with the 9"

[FuhBreezeE]

Sir Drags A Lot