Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Dec 2010
    Location
    townsend, mt
    Posts
    18

    white
    1998 Z-28 camaro

    4l60e won't come out of second, has sat for 2 years

    Don't know why? Car has sat for 2 years; 1st and second run out fine (rpm) wise: but if in drive or overdrive, slips to neutral at 2500 rpm in second gear: won't go to third or fourth! Can I please get some info on this!!??? Any input would help!!?

  2. #2
    Senior Member Naaman's Avatar
    Join Date
    Mar 2010
    Location
    AZ
    Posts
    1,480

    Cayanne
    98 Z28 Vert M6

    Gosh. I'm nowhere near an expert, so take this with a grain of salt.

    As I think about my understanding of how an auto works, I'd probably first speculate that you don't have enough oil pressure to "push" it into third gear. There could be a "leak" in the valve body or maybe it's clogged. I'm not sure if it could be a converter issue, as I would expect that to affect all gears.

    If it is an oil pressure issue, have you checked the fluid level? Might just need a top-off.
    Lid, Throttle Body, LS6 Intake, Heads, Cam, Magnaflow, LS7 Clutch, SFCs, STB, Panhard Bar, Strano Springs, Hollow Sway Bars, Poly/Roto LCAs, Konis, MGW Shifter

  3. #3
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,759

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    It sitting for two yrs you most likely need to drain the fluid and change the filter. That should have been done 1st prior to driving it. All fluids go bad the longer they sit. Car shows where they hook up a battery and magically start and drive a car that sat for yrs usually doesn't run for very long.

    Changing the fluids/filter will be the cheaper fix for the moment. It will also check off a possibility of issues when you go to trouble shoot it.

    List of possibilities:
    Transmission pump failure
    Shift Solenoid failure
    Manifold Pressure switch


    I don't think the clutches or plates are the issue, sounds like it's a fluid issue like Naaman is trying to say.

  4. #4
    Junior Member
    Join Date
    Dec 2010
    Location
    townsend, mt
    Posts
    18

    white
    1998 Z-28 camaro

    OK, I'll change the filter and fluids then try it again. Thanks for the input!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 10 years old!
    By Schmalgar in forum Firebird / WS6
    Replies: 41
    Last Post: 05-02-2012, 09:30 AM
  2. Anybody 30 years old....
    By Sarge in forum Almost Anything Goes
    Replies: 41
    Last Post: 09-04-2009, 04:36 PM
  3. Well after 30 years
    By Sarge in forum Almost Anything Goes
    Replies: 53
    Last Post: 08-21-2009, 11:40 AM
  4. '95 4L60E vs '01 4L60E biggest difference?
    By kgrantkey in forum Automatic Transmission
    Replies: 9
    Last Post: 04-28-2006, 12:09 AM
  5. LT1 Motor, LT1 4L60E, & LS1 4L60E
    By buck6680 in forum Parts For Sale / Trade
    Replies: 6
    Last Post: 09-05-2005, 07:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •