Results 1 to 6 of 6
Thread: stock rockers...ls1..ls3
-
01-29-2016, 08:28 AM #1
- Join Date
- Jan 2008
- Location
- Georgia
- Posts
- 8
- iTrader
- 0
Black- 87 GN
stock rockers...ls1..ls3
i am looking for stock rockers in good shape..........thanks Bob 706 466 622 seven
-
01-29-2016, 01:47 PM #2
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 22,146
- iTrader
- 1 (100%)
Black & Blue- '02 WS.6 / '07 Suburban
Don't have any yet... but someday soon I hope to have some leftovers!
-
01-29-2016, 02:52 PM #3
- Join Date
- Jan 2008
- Location
- Georgia
- Posts
- 8
- iTrader
- 0
Black- 87 GN
sounds good...hopefully i will need them.............thanks Bob
Bob Wren 1987 GN 74k best with te44 11.44 at 122.86mph with a 1.94 60ft TA 4 bolt headers with a 70 p-trim coming and a 400 with a brake
1991 Syclone--stock
1955 Belair 2dr---not so stock
2001 Duramax---edge--straight pipe
-
01-30-2016, 04:02 AM #4
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 22,146
- iTrader
- 1 (100%)
Black & Blue- '02 WS.6 / '07 Suburban
My recollection is that you can purchase new ones from the dealership for not all that much $$. Check with our sponsor GM Parts Direct as well.
-
01-30-2016, 08:53 AM #5
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
- iTrader
- 3 (100%)
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Wait do you want ls1 or ls3 rockers? LS3s use two different rockers the intake is the same as the ls1 but the exhaust is offset and won't work on the ls1.
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
02-01-2016, 05:14 PM #6
- Join Date
- Jan 2008
- Location
- Georgia
- Posts
- 8
- iTrader
- 0
Black- 87 GN
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What springs to use with 1.85 Rockers STOCK LS1??
By 5abivt in forum Internal EngineReplies: 14Last Post: 04-25-2010, 01:02 PM -
590 cam with stock rockers?
By King06C6 in forum CorvetteReplies: 0Last Post: 12-15-2008, 08:25 PM -
roller rockers or stock??
By z28gc222 in forum Internal EngineReplies: 4Last Post: 09-12-2007, 06:07 AM -
WTB: stock rockers, stock pushrods and other parts
By jimmy 2 times in forum Parts Wanted / TradeReplies: 4Last Post: 10-31-2006, 12:20 PM -
Stock Rockers
By WS6ICK in forum Internal EngineReplies: 18Last Post: 10-08-2006, 08:45 PM
Bookmarks