Results 1 to 9 of 9
Thread: Car alarm VATS
-
06-18-2014, 04:34 AM #1
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
Car alarm VATS
Any of you guys have your alarm go off for no apparent reason. Its to the point I either need to put a switch on the horns or sell the car. I need my sleep!
p.s. Is there a way to program the horns out of the VATS system?Last edited by johnfin; 06-18-2014 at 04:50 AM. Reason: addition
-
06-18-2014, 05:02 AM #2
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
It's not the vats. Unplug the motion detector in the back hatch where the spare tire is stored and it will quit going off. When they go bad it causes the alarm to go off randomly. Should be a little box with a dial on it that is mounted to the top of the wheel well.
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
06-18-2014, 06:46 AM #3
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
Thanks, now I can get some sleep.
-
06-18-2014, 07:21 AM #4
-
06-18-2014, 02:15 PM #5
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
You know I was thinking...I live in florida and its thunder season now, rain beating down on the car, massive thunder, lightning. Why has it never gone off before?
-
06-18-2014, 02:38 PM #6
Could just be going bad... easy to test it.
-
06-18-2014, 04:17 PM #7
-
06-21-2014, 02:01 AM #8
- Join Date
- Jun 2011
- Location
- Calgary Alberta Canada
- Age
- 57
- Posts
- 48
Bright Red- 1998 Camaro Z28
The shock sensor case gets condensation inside and corrodes and shorts out the circuit board.....open it up ...dry it out and clean up the board.
Happened to mine last year and after i did my fix its been fine since, I sprayed a bit of WD-40 in there before putting it back together.
Last edited by Canadian LS1; 06-21-2014 at 02:13 AM.
-
06-22-2014, 07:49 AM #9
- Join Date
- Jun 2012
- Location
- florida
- Posts
- 545
if i use the key to lock the door, the alarm is disabled, right? reason i ask is when i use the remote to enter the car, the LED is still blinking. when i shut the door and use the key the LED is off. Why does it still blink when you enter the car with the remote.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
VATS help
By totalkos in forum General HelpReplies: 6Last Post: 07-21-2008, 06:28 PM -
Vats
By kris6273 in forum General HelpReplies: 4Last Post: 06-26-2008, 02:27 PM -
Vats Help
By fasted in forum Stereo and ElectronicsReplies: 0Last Post: 03-04-2008, 02:48 AM -
vats
By supercampeones4 in forum Computer & TuningReplies: 1Last Post: 02-08-2008, 01:19 AM -
VATS????Security problem with the VATS.
By LS1RacerMan30 in forum General HelpReplies: 14Last Post: 07-14-2007, 07:39 AM
Bookmarks