Advice on new Tranny

Spartan_Angel · 08-27-2005, 09:03 AM

As I mentioned in another post, I've more or less blown my transmission. Its going to require a rebuild or a replacement, and if I rebuild it I already plan to put stronger parts in it. However, I want to compare the cost of replacing it altogether, and was wondering if anyone had any advice or suggestions as to where I could get a good upgraded transmission. Any feedback on this would be appreciated.

***Ed Blown Vert*** · 08-27-2005, 09:33 AM

This is the one I have

FLP

Spartan_Angel · 08-28-2005, 10:38 AM

Seems like a good tranny if can handle your setup, hehe

***Sarge*** · 08-28-2005, 01:42 PM

These folks have built two trannies for me...top notch and very reasonable...
http://www.grapevineautomaticinc.com/services/
They are in Grapevine....

Spartan_Angel · 08-29-2005, 09:58 PM

I'll see if I can get an estimate from them tomorrow, thanks

***Ed Blown Vert*** · 08-29-2005, 10:11 PM

Quote:

Originally Posted by Spartan_Angel

Seems like a good tranny if can handle your setup, hehe

That was before the 383. I may need this one now.

FLP

Spartan_Angel · 08-29-2005, 10:18 PM

The link didn't work, but I'm pretty sure you meant the Stage 5 or Level 5...whatever the next one up was. However, I just got out of the Army (medical technicality =/ ), and can't quite afford a mighty upgrade yet, hehe.

08-27-2005, 09:03 AM	#1
Spartan_Angel Junior Member Join Date: Aug 2005 Location: Ft. Worth, TX Age: 24 Posts: 32 '99 Camaro SS Silver	Advice on new Tranny As I mentioned in another post, I've more or less blown my transmission. Its going to require a rebuild or a replacement, and if I rebuild it I already plan to put stronger parts in it. However, I want to compare the cost of replacing it altogether, and was wondering if anyone had any advice or suggestions as to where I could get a good upgraded transmission. Any feedback on this would be appreciated.

08-27-2005, 09:33 AM	#2
*Ed Blown Vert* Blown, Stroked, & Sprayed Join Date: Aug 1999 Location: Sunny San Diego, Ca Posts: 13,250 383 Procharged & N20 Vert Black	This is the one I have FLP __________________ Black 1999 Blown Convertible A4 Forged 383, ATI D-1SC NX MAF Kit, 222/226 .585 115 AS Stage II 6.0L FI Heads 548.0 RWHP - 536.8 RWTQ - 10# - D1 666.0 RWHP - 734.2 RWTQ - 125 Shot - P1 Black 2008 GMC Yukon Hybrid 4WD DDM 55w 5000k HID Hi/Lo GMX-322 LockPick WeatherTech Cargo Liner Gunner 6 20" Wheels

08-28-2005, 10:38 AM	#3
Spartan_Angel Junior Member Join Date: Aug 2005 Location: Ft. Worth, TX Age: 24 Posts: 32 '99 Camaro SS Silver	Seems like a good tranny if can handle your setup, hehe

08-28-2005, 01:42 PM	#4
*Sarge* Let'sPartyLikeIt's1959 Join Date: Aug 2005 Location: Texas Department of Corrections Posts: 16,349 So many warnings we made him a mod	These folks have built two trannies for me...top notch and very reasonable... http://www.grapevineautomaticinc.com/services/ They are in Grapevine....

08-29-2005, 09:58 PM	#5
Spartan_Angel Junior Member Join Date: Aug 2005 Location: Ft. Worth, TX Age: 24 Posts: 32 '99 Camaro SS Silver	I'll see if I can get an estimate from them tomorrow, thanks

08-29-2005, 10:18 PM	#7
Spartan_Angel Junior Member Join Date: Aug 2005 Location: Ft. Worth, TX Age: 24 Posts: 32 '99 Camaro SS Silver	The link didn't work, but I'm pretty sure you meant the Stage 5 or Level 5...whatever the next one up was. However, I just got out of the Army (medical technicality =/ ), and can't quite afford a mighty upgrade yet, hehe.