Page 263 of 355 FirstFirst ... 1363113163213223233243259260261262263264265266267283293303313 ... LastLast
Results 5,241 to 5,260 of 7099
  1. #5241
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    I am not much of a welder and it's about 40-50 bucks to have it welded up right since I have the parts. Headers n Y n additional pipes are far more but will happen one of these days.
    2001 Trans Am Vert

  2. #5242
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Quote Originally Posted by hardtrailz View Post
    I am not much of a welder and it's about 40-50 bucks to have it welded up right since I have the parts. Headers n Y n additional pipes are far more but will happen one of these days.
    Ah okay mine have always been band clamped together. That and here they charge a lot for welding.

    Sent from my HTC6535LVW using Tapatalk
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  3. #5243
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    I could clamp since I have them but I have found welding to be a better way.

    I found if you have the parts many exhaust places will install pretty cheap. I bought a muffler n tip for my offroad rig and they bent all new cat back pipe included up n over axle and welded it up for $110.

  4. #5244
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    Check out a company called Mandrel Bending Solutions.

    They sell exhaust tubing in Stainless and Aluminum in all sizes. It's cheap too. I ordered all my tubing form them for under $120

  5. #5245
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    I got all I need for now, but will look into them. I should have under $100 into having Hooker muffler and aluminized 90s and 18 inch 3.5 Stainless tips all welded in.

  6. #5246
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    Probably doesn't have a welder or know how to weld.

    Sent from my SM-G900V using Tapatalk
    Boost gets you laid, unless your name is Jon.

  7. #5247
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    Nvm, I was on previous page. Guess I was right lol.

    Sent from my SM-G900V using Tapatalk

  8. #5248
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    I wondered since he clamped all his.

  9. #5249
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    I mention them because no one in my area has or is able to mandrel bend tubing.

  10. #5250
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    Cruising their site i saw they do have lots of nice pieces that could be handy in many applications. I already passed the site along to a buddy that builds racing hillclimb trucks since i know he can use some oddball exhaust configurations sometimes and they could prove helpful.

  11. #5251
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Technically I clamped nothing on my current exhaust since its dumped headers atm lol. Later to be routed out the front bumper.

    Sent from my HTC6535LVW using Tapatalk

  12. #5252
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Removed my harness to get it repinned.



    Sent from my HTC6535LVW using Tapatalk

  13. #5253
    Member DarrenWS6's Avatar
    Join Date
    May 2015
    Location
    Blossburg, PA
    Age
    34
    Posts
    472

    Silver Metallic
    2000 Trans Am WS6

    I replenished my detailing shelf with some fresh new products. Almost all are Adams Polishes products. I have wanted to try their stuff for years and glad to now have $200 in cleaning supplies. Their Tire and Rubber cleaner is by far the best tire cleaner I have ever used. Their VRT ( Vinyl Rubber Trim ) is the best plastic and rubber dressing and protectant I have used to date. Water beads off of it and does not hang on, and it adds a dark new look without a high gloss. I hate wet high glossy tires, all that sticky silicone based stuff does is attract and hold dust. There glass sealant is incredible. I always clay and wax glass, this stuff makes wipers nearly unnecessary to have on. Water shoots right off. I am definitely a detail nut so this stuff has me quite happy.
    2000 Trans Am WS.6 M6

    SLP lid & bellow w/ K&N, GMMG catback w/ Corsa Clones, UMI SFC, UMI Adj. Panhard, UMI Adj. TQ arm w/ relocation kit, QTP Longtube headers ORY, LS6 intake, EGR/A.I.R delete.
    Eibach prokit, Bilstein HDs, Nitto NT555s, skip shift elim, whiteface overlays, 20% tint, matte black decal/overlays
    YouTube.com/DarrenWS6

  14. #5254
    Senior Member raynor139's Avatar
    Join Date
    Aug 2007
    Location
    Greensboro, NC
    Age
    39
    Posts
    1,335

    Pewter
    2002 Trans Am WS6 M6

    Their vrt is great and I love their in and out spray. I picked up McKees 37 version of the in and out to try out. I tend to go elsewhere for stuff then Adam's. They got me into detailing but tend to be expensive for what it is. My gf opens my detailing closet and just gets confused by all the stuff I have. I had to go out and buy a 5 shelve unit to hold most of it.
    Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.

  15. #5255
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Quote Originally Posted by DarrenWS6 View Post
    I replenished my detailing shelf with some fresh new products. Almost all are Adams Polishes products. I have wanted to try their stuff for years and glad to now have $200 in cleaning supplies. Their Tire and Rubber cleaner is by far the best tire cleaner I have ever used. Their VRT ( Vinyl Rubber Trim ) is the best plastic and rubber dressing and protectant I have used to date. Water beads off of it and does not hang on, and it adds a dark new look without a high gloss. I hate wet high glossy tires, all that sticky silicone based stuff does is attract and hold dust. There glass sealant is incredible. I always clay and wax glass, this stuff makes wipers nearly unnecessary to have on. Water shoots right off. I am definitely a detail nut so this stuff has me quite happy.
    I've been looking at what to replenish my stock with as well and I think I'll have to give their stuff a shot. I need something that can get water spots off. Here we have hard water so even when I dry the car while detailing it there are water spots.

    Sent from my HTC6535LVW using Tapatalk

  16. #5256
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    Tried fixing drivers mirror mount w jb weld but no luck. Searching for a replacement

  17. #5257
    Member hardtrailz's Avatar
    Join Date
    Jul 2016
    Location
    SE IN
    Posts
    210

    Blue Green Chameleon
    2001 Trans Am Vert

    Fixed drivers mirror with some safety wire and 4 holes.







    Also got the Hooker Aerochamber and 3.5 tips on it. Not real loud, but better tone and no drone at all. Will work til headers n full exhaust happens down the line.


  18. #5258
    Senior Member kingls1's Avatar
    Join Date
    Apr 2011
    Location
    Johnstown,PA
    Age
    54
    Posts
    1,104

    Silver
    1999 Trans-Am, 2012 Sonic

    Got my tourqe relocation brace mounted and scored access to a lift at my good friends garage, after working on a lift I think I'm going to become BEST FRIENDS with him hahahahaha.



    Love this view
    99 Trans Am, SLP Lid, Blackwing filter, smooth bellow, Ported TB, LS6 intake, Ws6 lower ram air box, OBX LT's, Magna Flow cat back, LS7 clutch, Tick MC, Hurst Shifter, Frost Tune, UMI SFC,LAC, STB, PB, Torq Arm, Super Hawk hood, Torq Thrust II, Kee Audio.
    Strange S60 4:10's, D&S Rotors, S/S Brake Lines.
    Nitto NT05R Track Tire's, 12.7 @ 108 / 1.82 60'
    Wish list.
    Coil overs, Heads & Cam

  19. #5259
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    I finally got the mounts finished for clearance.









  20. #5260
    Senior Member raynor139's Avatar
    Join Date
    Aug 2007
    Location
    Greensboro, NC
    Age
    39
    Posts
    1,335

    Pewter
    2002 Trans Am WS6 M6

    Quote Originally Posted by kingls1 View Post
    Got my tourqe relocation brace mounted and scored access to a lift at my good friends garage, after working on a lift I think I'm going to become BEST FRIENDS with him hahahahaha.



    Love this view
    I keep telling my brother we need to put a lift in his big ass garage but of course all him and his wife have are motorcycles so they don't see the need.

Page 263 of 355 FirstFirst ... 1363113163213223233243259260261262263264265266267283293303313 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. new guy just got my first trans am today
    By roger_johnson2002 in forum New Member Introductions
    Replies: 9
    Last Post: 07-14-2011, 08:35 AM
  2. Found this on the windshield of my Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 60
    Last Post: 03-10-2009, 12:11 PM
  3. Got into an accident in the Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 30
    Last Post: 09-21-2008, 04:32 PM
  4. Just got my Trans Am today!
    By vannatte in forum Firebird / WS6
    Replies: 34
    Last Post: 09-20-2007, 09:57 AM
  5. First time at Track today!!! 2000 Trans Am ws6
    By gimmeadonut in forum Drag Racing
    Replies: 1
    Last Post: 11-12-2005, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •