Page 243 of 355 FirstFirst ... 4393143193203213223239240241242243244245246247263273283293343 ... LastLast
Results 4,841 to 4,860 of 7099
  1. #4841
    Senior Member raynor139's Avatar
    Join Date
    Aug 2007
    Location
    Greensboro, NC
    Age
    39
    Posts
    1,335

    Pewter
    2002 Trans Am WS6 M6

    Hopefully that's as far as it goes. Now you got another reason to recommend sfcs for people.
    Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.

  2. #4842
    Member Decadence75's Avatar
    Join Date
    Aug 2013
    Location
    Missississipi
    Posts
    381

    Bright Red
    2000 Trans Am

    Quote Originally Posted by 024mula View Post
    Got the Bird out of the garage and decided to change oil, she looks like she wants to take off..............
    Sometimes they take full flight.





    Quote Originally Posted by SMWS6TA View Post
    one step forward three steps back....

    turning into my subdivision my drivers front wheel came off....3 studs snapped and I can't find any lugs....

    That happened to me last year on my way to work. About a quarter mile from my office I hear a loud clunk and my rear driver side drops down. I manage to get into the center lane of a divided highway and get out to find all 5 studs are snapped off. Luckily I wasn't going fast and the rotor dropped down and was riding on the rim. No serious damage to the wheel but the scars on it still make me mad.

    It’s a Wheel of Fortune I Didn’t Die | 2000 Trans Am Blog

  3. #4843
    Veteran pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    22,146

    Black & Blue
    '02 WS.6 / '07 Suburban

    ARP didn't have any wheel studs in stock for our cars back when I swapped out to the longer ones for the track. I ended up buying studs through Moser and they have held up real well so far.

  4. #4844
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    Well there's great news.....

    Oil pan, wheel & exhaust all are good. Only victims were the lug studs, rotor, oil filter & center cap for the wheel. Thank God I quickly shut the engine off. Only loss about 4 quarts of oil. Guess she wanted an oil change...


    I went ahead and replace the hub figured with 170k miles on it might as well, plus new studs already installed. Got new lugs as well and made sure every damn one of them were tight. Has to get the wheel re-balanced because the weight came off.


    Here is some better pics.











    All better


  5. #4845
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    Quote Originally Posted by pajeff02 View Post
    ARP didn't have any wheel studs in stock for our cars back when I swapped out to the longer ones for the track. I ended up buying studs through Moser and they have held up real well so far.
    They are on my list of crap to get......

  6. #4846
    Member DarrenWS6's Avatar
    Join Date
    May 2015
    Location
    Blossburg, PA
    Age
    34
    Posts
    472

    Silver Metallic
    2000 Trans Am WS6

    SMWS6TA Glad to hear yourself and your car weren't injured badly!

    I ordered my LEDs on my morning break from eBay. Sylvania Zevo LEDs. I typically get V-LEDs bulbs, but Sylvania has had a great reputation with the Zevo bulbs. Got a pair of 3157 amber bulbs ( 3457 capable ) and one Zevo 194 white LED for my plate bulb so I can put the LED in the WS6's plate housing back into my truck. I seen they had a make offer option, I rarely ever play around with those but I did with this purchase to see where it got me, we all know LEDs get expensive quick.

    The pair of 3157s were $24.99, I offered $21.99. Got returned with $23.85 counter offer. Not a drastic drop but better than nothing. The single 194 was $9.99, offered $7.99, counter offered $9.50. So I took the offers and they are on the way. So I saved a whopping $1.63 . To top that off, I went walking through the local Walmart automotive section earlier today and in the light bulb aisle I found the #194 zevo for $9.85. Thought to myself crap I could have got it here and played around with it today in my other car. Hoping for a 5000k pure white and not a 6000k blue hue white.
    2000 Trans Am WS.6 M6

    SLP lid & bellow w/ K&N, GMMG catback w/ Corsa Clones, UMI SFC, UMI Adj. Panhard, UMI Adj. TQ arm w/ relocation kit, QTP Longtube headers ORY, LS6 intake, EGR/A.I.R delete.
    Eibach prokit, Bilstein HDs, Nitto NT555s, skip shift elim, whiteface overlays, 20% tint, matte black decal/overlays
    YouTube.com/DarrenWS6

  7. #4847
    Veteran 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,526

    Red
    02 35th LE Camaro SS

    That oil filter held up pretty good.
    Boost gets you laid, unless your name is Jon.

  8. #4848
    Member Decadence75's Avatar
    Join Date
    Aug 2013
    Location
    Missississipi
    Posts
    381

    Bright Red
    2000 Trans Am

    Quote Originally Posted by DarrenWS6 View Post
    SMWS6TA Glad to hear yourself and your car weren't injured badly!

    I ordered my LEDs on my morning break from eBay. Sylvania Zevo LEDs. I typically get V-LEDs bulbs, but Sylvania has had a great reputation with the Zevo bulbs. Got a pair of 3157 amber bulbs ( 3457 capable ) and one Zevo 194 white LED for my plate bulb so I can put the LED in the WS6's plate housing back into my truck. I seen they had a make offer option, I rarely ever play around with those but I did with this purchase to see where it got me, we all know LEDs get expensive quick.

    The pair of 3157s were $24.99, I offered $21.99. Got returned with $23.85 counter offer. Not a drastic drop but better than nothing. The single 194 was $9.99, offered $7.99, counter offered $9.50. So I took the offers and they are on the way. So I saved a whopping $1.63 . To top that off, I went walking through the local Walmart automotive section earlier today and in the light bulb aisle I found the #194 zevo for $9.85. Thought to myself crap I could have got it here and played around with it today in my other car. Hoping for a 5000k pure white and not a 6000k blue hue white.
    Got mine from superbrightleds.com Been running them for a few years now with no problems.

    2000 Trans Am T56 Swapped - GMPP "HOT" Cam | LS6 Intake | PnP TB | 25% UD Pulley | Founders adjustable LCA/PHB/TA | Norris Catch Can | TSP 1-7/8 SS LT | TSP True Duals with bullets | SLP Lid | UMI Shock tower brace | Torq Thrust M 17x9 275/40 front 17x10.5 315/35 rear - YouTube Videos - My Car Site

  9. #4849
    Veteran pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    22,146

    Black & Blue
    '02 WS.6 / '07 Suburban

    I awoke the Trans Am from its winter slumber. She is now in the lift bay for pre-flight inspection and a little routine maintenance.

  10. #4850
    Senior Member raynor139's Avatar
    Join Date
    Aug 2007
    Location
    Greensboro, NC
    Age
    39
    Posts
    1,335

    Pewter
    2002 Trans Am WS6 M6

    Quote Originally Posted by Decadence75 View Post
    Got mine from superbrightleds.com Been running them for a few years now with no problems.
    Ordered some stuff from there today. Figure if I like how the DRls and side markers come out ill get some more. They did have switchbacks for our cars so I got those for the turn signals.

  11. #4851
    Member udy2554's Avatar
    Join Date
    Jun 2015
    Location
    Naples, NY
    Posts
    146

    Dark metallic blue
    2000 WS6 vert!

    Quote Originally Posted by DarrenWS6 View Post
    Nice layout Udy!



    Random question, I assume you may be selling your previous exhaust as a whole unit? If not, what would you want for the intermediate pipe? Including the piece that connects to the Y pipe.

    Sorry it took so long to get you a pic!

    These are the pieces of the SLP LM I have!





    The short 90* going over the axle is what I had to cut! Which parts do you need?

  12. #4852
    Member DarrenWS6's Avatar
    Join Date
    May 2015
    Location
    Blossburg, PA
    Age
    34
    Posts
    472

    Silver Metallic
    2000 Trans Am WS6

    Quote Originally Posted by udy2554 View Post
    Sorry it took so long to get you a pic!

    These are the pieces of the SLP LM I have!

    Click for full size

    Click for full size

    The short 90* going over the axle is what I had to cut! Which parts do you need?
    Looking closer it looks like you cut the over axle section down low, which might render it not operable for me. I want to get a 3" midpipe as I salvaged my OEM one when the GMMG kit got installed. I'm up in the air on the midpipe portion since the LM1 is in the midpipe. Looks like you had the same problem I did. Some fool put a U bolt clamp on and torqued it down until it crushed into the pipe that was inserted male end. I had a shop end up making that pipe 3.25" after working that out lol! This is why I prefer band clamps.

    Might not need anything then, I just want to get a 3" midpipe for a good deal vs custom ordering one. I may just give MadHammer a call and see if they will ship me one out.

  13. #4853
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Going to swap in a Th350 over my 4L60e.
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  14. #4854
    Senior Member Too Fast's Avatar
    Join Date
    Nov 2006
    Location
    Indianapolis
    Age
    61
    Posts
    5,188

    Black
    2000 WS6 6spd Hooker LT

    Drove Too Fast 250+ miles today, working on the spring cruise for the local Firebird Club. Anyone interested, PM me. We are going to the Ohio County museum in Rising Sun, Indiana on April 16th. Or just quote me hear. Everyone on this forum would be welcome.

  15. #4855
    Member BobbyGFirebird's Avatar
    Join Date
    Jul 2015
    Location
    NY
    Posts
    147
    Blog Entries
    1
    Hey Gents. I don't get all this broken stud stuff. Also an article in Car & Driver about NEW Subaru WRX's "commonly" breaking wheel studs. Aren't wheel studs supposed to be like, um... super-strong ? :-)

  16. #4856
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,758

    Navy Blue Metallic
    98 T/A w/ mods, 00 FBVert

    Depends on the material, how much torque applied, the stretch of the bolt and other x factors.


    Crappy lugs or loose fitting lugs are the most common failures but everytime the tire shop guy uses an impact gun to tq the F@#k out of them it stretches the threads and bolts. Over time they will fail.


    Not saying this is what happen to mine. Mine where most likely not tighten enough down and came loose.

  17. #4857
    024mula 024mula's Avatar
    Join Date
    Dec 2010
    Location
    Ohio
    Age
    63
    Posts
    734

    silver
    '02 Firebird Formula

    I torque my lug nuts 100 Lbs. with a torque wrench instead of the tire shop using an impact gun. Is this O.K.
    2002 Firebird Formula - 5.7 Liter - "Last of the Breed"

  18. #4858
    Senior Member Cutlass's Avatar
    Join Date
    Apr 2008
    Location
    Madison, WI
    Posts
    7,006

    1999 Formula WS6 M6-sold
    2001 Silverado Z71

    Yes, of course a torque wrench is ok. Preferred actually.
    But FWIW, impact guns and torque sticks are used 10 trillion trillion times more often to tighten wheels then torque wrenches and really shouldn't concern any one. They are safe. An impact gun with a regular socket can certainly do some damage though.
    -------------------------------------
    Kooks 1 7/8" race headers, Kooks ORY, Borla catback, Nitto 555R, LS6 intake manifold, Shaner S3 ported stock throttle body, SLP lid, smooth bellows, JAAM Ram Air kit, Elite Engineering catch can, LS6 valley cover, EGR and AIR deleted, Frost tune, and Simpson Racing child car seat in the back. 13.2 @ 108MPH

  19. #4859
    Member RONS98TA's Avatar
    Join Date
    Jan 2009
    Location
    MARYLAND
    Age
    50
    Posts
    807

    BLACK
    1998 PONTIAC TA

    I have been using an impact gun with a torque stick since the 90's. Never once have I had an issue with the wheels coming loose or breaking a stud off. Of course, they are some vehicles that I dont have a torque stick that fits, so I just use my impact gun an common sense. As it has been said before, the best way is a torque wrench though, using the factory recommended settings.
    1998 Pontiac TA, stock heads, FAST 90, FAST 90 TB, FLP LT, off road y-pipe with cat delete, flow master muffler, comp cams 54-457-11 223/231-610/617-112 LSA, Pro charger D1SC with FMIC @ 8psi, FROST tune, VIG 3200 stall, built 4l60e, snow meth kit, MOSER 12 bolt 373 gears, Derale 13900 trans cooler.

  20. #4860
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    I just tighten it as much as can with a ratchet and then do a quick squeeze on each socket with my impact. I've never had an issue with this method.

Page 243 of 355 FirstFirst ... 4393143193203213223239240241242243244245246247263273283293343 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. new guy just got my first trans am today
    By roger_johnson2002 in forum New Member Introductions
    Replies: 9
    Last Post: 07-14-2011, 08:35 AM
  2. Found this on the windshield of my Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 60
    Last Post: 03-10-2009, 12:11 PM
  3. Got into an accident in the Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 30
    Last Post: 09-21-2008, 04:32 PM
  4. Just got my Trans Am today!
    By vannatte in forum Firebird / WS6
    Replies: 34
    Last Post: 09-20-2007, 09:57 AM
  5. First time at Track today!!! 2000 Trans Am ws6
    By gimmeadonut in forum Drag Racing
    Replies: 1
    Last Post: 11-12-2005, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •