Results 761 to 780 of 7102
-
07-15-2011, 02:36 PM #761
It was 20 bucks as an add on to the lid...I was going to have to get a new one soon anyway so it was a no brainer. Is there much advantage to the coupling?
-
07-15-2011, 03:13 PM #762
- Join Date
- Mar 2008
- Location
- NYC
- Posts
- 1,460
Navy Blue Metallic- 2000 T/A Firehawk M6
SLP claims 6hp for their smooth bellows. I paid less than 6 bucks for the coupling at home depot. so under 1 dollar per hp.... heck even if it's only 2hp its a better value than most upgrades. Might need to cut it and work it to make it hold right since it's obviously not made for it. Works great on my car because i have solid mounts so the engine physically can't move. no need for a flexible middle lol.
-
07-15-2011, 05:33 PM #763
Alright, I'll look into it. Is there a specific diameter I am after?
-
07-15-2011, 07:28 PM #764
- Join Date
- Jan 2011
- Location
- Mishawaka IN
- Posts
- 123
Silver- 2000 Trans Am
Just got back from Virginia Beach and went out and started her up. She sounds soooo much better than my dad's Audi A6...
-
07-16-2011, 03:52 AM #765
-
07-16-2011, 05:18 AM #766
If you guys have a get together soon and its not too far east of Indianapolis, let me know. Its about a 2 hour drive for me.
-
07-16-2011, 10:02 AM #767
- Join Date
- Jan 2011
- Location
- Mishawaka IN
- Posts
- 123
Silver- 2000 Trans Am
-
07-16-2011, 01:03 PM #768
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
Put the mirrors on the hood....these have been collecting dust for almost two years in my garage. Look awesome, now I just need an engine installed so the mirrors aren't reflecting the ground
Last edited by ls1camino; 07-16-2011 at 01:07 PM.
-
07-16-2011, 01:10 PM #769
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
Why is my image not showing up?
Is it the new forum? Does it not like [img][/img] coding?
-
07-16-2011, 02:11 PM #770
- Join Date
- Jan 2010
- Location
- East of Cleveland, Ohio
- Posts
- 3,827
Black- 99 WS.6 - Modified
I see a pic.....
-
07-16-2011, 02:32 PM #771
- Join Date
- Nov 2010
- Location
- The Woodlands,Texas...N.O.
- Posts
- 1,016
Pewter Metallic- 2000 Pontiac Trans Am WS6
nothing,but i need 2 start it up havent drove it in awhile
-
07-16-2011, 08:43 PM #772
Tore the exhaust apart and prepped the motor for LTs, also bolted up a Volant CAI and began deleting the AIR system.
-
07-17-2011, 09:58 AM #773
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Picked up my Weld Prostars the other day, ground down the rear calipers for clearence and bolted them on today to make sure everything clears. Ordering tires somethime this week.
Attachment 22665
Attachment 22666
Attachment 22667
-
07-17-2011, 10:50 AM #774
Nice!!!
TLS and I will be at Beaver Springs this Saturday running the cars if you are interested.
-
07-17-2011, 12:09 PM #775
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Wish i could Jeff, I have to work all day Saturday.
-
07-17-2011, 05:04 PM #776
Me and my hubby went to DQ for a frozen sweet treat, then off to conquer some TN backroads. WS6+curvy mountain roads= huge ass grin on my face
-
07-17-2011, 10:04 PM #777
Wrapped up Motor mounts, Headers, CAI, ORY and AIR Delete. Hopefully finishing up the Cat Back soon.
-
07-18-2011, 03:25 AM #778
-
07-18-2011, 03:59 PM #779
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Fixed my leaking differential and filled it up.
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
07-18-2011, 04:10 PM #780
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Got my tires today, Front - 165/80/15 Rear - Mickey Thompson ET Street 275/50/15
Attachment 22688
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks