What did you do with your Trans Am today?

[02transamce]

installed heat sleeve on second plug wire from the front on the pass side because it is touching a tube coming off the header and hosed all the damn pollen off

[fbodyNATION]

Pulled it out of storage after installing a battery i didnt drive it though,but i did manage to clean it up,maybe i'll drive it this sunday if the weather is good

[timboo04]

I tinted the windows on it yesterday and then sprayed it off

[Joels1]

Installed dynomat on passenger door along with a new vapor barrier.Making that friggen vapor barrier to forever lol.

[02transamce]

Good job on that. ^^^
Posted via Mobile Device

[mike171562]

Somebody should start a thread "What is wrong with your Trans Am Today?"

[TransAmTerry]

Messed with friggin' DRL's again today. Order over-sized gaskets for the sockets from AutoTrix. OMG ,, what a tight fit - took 2 hands pushing and twisting with all I had to get them to lock in. Determined to get them damn things to work right. There is an 8 page thread on that whole topic.

[pajeff02]

Somebody should start a thread "What is wrong with your Trans Am Today?"

Our "youngest" Trans Ams are now going on 9 years old. They are allowed to have issues.

[mike171562]

Our "youngest" Trans Ams are now going on 9 years old. They are allowed to have issues.

Yea, my girl has been acting pretty good lately, but she can be a real bitch sometimes.

[LSCyaL8R]

Broken seat belt guide... can't find the right color... just changing both to match....
Broken DRL bulb.... again.... might need a socket
Broken Passenger side headlight gear... gonna get the brass gears and do that thing
Kinked air line on my drag bags... can't fill the passenger side bag.... the most important one
Still need to clean up all the wires from the stereo install
Leaking air from the rear passenger wheel. gonna have to have it reseated.
Car is filthy... needs a serious detailing
T-tops leaking
need to bleed the clutch... bit of mush up top.
It's due for an oil change
should change the rear end fluid also. oh yeah... that's leaking too.

I have a busy spring ahead of me... ugh

[blackbird0230]

Took out the k&n filter, put in a a new ac delco, change the oil, cleaned the maf sensor, my SES light went off so I'm hoping it stays off, not likely tho because I unplugged the battery. And cleaned my headers and tranny =)

[fbodyNATION]

let my dad wash & wax it,now hes driving it around the city,at first he said it was too fast & sits too low to the ground,now he cant stop driving it LoL! u know u have the right car when everybody LOVES your car T/As rock!

[TransAmTerry]

I think I got a pretty good handle on those DRL's now,,,, time will tell. Now I have a pretty loud speak coming from the right front suspension , very annoying!!! Can't seem to pin point it. Anybody else have a similar issue??? Doesn't winter know its supposed to be gone????

[Joels1]

Finally finished fixing my driver`s side window regulator,dreaded doing it for weeks....what a weight off my shoulders!!!!

[Joels1]

Noticed my driver`s seat control wires are arching out against the seat frame..........this will be fun.Has anyone seen a post on how to remove the panel around the seat controls? Hope I don`t have to take the seat out.

[sok915]

Changed oil/filter
changed fuel filter
put on slp lid
put on magnaflow catback
put on skip shift
descreened MAF
Gave her a bath after

[pajeff02]

Hooked the Battery Tender back up to her.

[LSCyaL8R]

both DRL sockets are shot... going to need all new housings and sockets.... ugh.

On the bright side I met an ex SLP employee who thinks he may have built my car.... It was a nearly religious experience. He told me where I'd find his signature if it were one of his. now i gotta go look.

[Eganslp]

Finally finished fixing my driver`s side window regulator,dreaded doing it for weeks....what a weight off my shoulders!!!!

is there a write-up on this?? bc last year when mine out on me mech. charged me 900$ between parts and labor. Ain't doing that again!!!

[Too Fast]

^^^Wow $900 for only one window regulator? What's it made out of, unobtainium?

Where I work $900 would still be real high for both.