What did you do with your Trans Am today?

[pajeff02]

Jeff I like the Bogarts. Theyre the same ones we used to have on our lightning.

Anyway, I went to do plugs. Had all 8 out in 15 minutes from the top, not to bad if I say so myself. hah. But then I found out I dont own a plug gapper. After looking at the old plugs it looks like they were never gapped either. Im guessing having them opened a little more to spec will help a little bit. They did have some oil on them, im guessing valve seals, it never smokes and all cylinders were between 117-125 psi compression.

Thanks!

That could be some kind of record.

[Knight]

I set a record once while changing plugs.....the amount of cuss words one can utter.....

[ls1camino]

I set a record once while changing plugs.....the amount of cuss words one can utter.....

I usually go for the most scratches on the back of my hands...

[pajeff02]

I usually go for the most scratches on the back of my hands...

^^ This.

[krese]

new (to me) wheels this weekend:

chrome c4 ZR1s w/ WS.6 center caps!

[Whamhammer]

I usually go for the most scratches on the back of my hands...

God damn slow internet making me double post...delete please.

At least your not trying to change plugs on a third gen' v-8. I had to be a contortionist on my old '89!!!

[SMWS6TA]

Kerse, those look nice also you don't see to many hardtops anymore.

[JoshuaGrooms83]

EEK! started sanding and fiberglass repairing my WS6 style hood (aftermarket) so i can get it ready for paint.

[krese]

this was in the mailbox today : it is to replace the FUGLY blue and yellow plates that NY has moved to. i was able to get a custom yankee plate and it was worth it.

[AfterYou]

Walked into the Garage, installed my new decals, shampoo'd the carpet, realized i was out of gas, so i took a cruise down the valley to fill it up, and as it cost ~80 bucks, i will let it sit in my garage just a little bit more haha
good thing my DD is a firebird!

[SMWS6TA]

wife just called me to tell me my shifter is here.

[Spikito]

screwed with my exhaust, some welds broke and my driver side tip wont stay in the hanger....

[SMWS6TA]

Got the PRO 5.0 installed. Only thing I forgot was to re-install the rubber boot screws. Oh-well next time.

What a difference. It's going to take a few trips to get use to it.


side by side comparison


Finished



I've got enough pics to do a how to thread if anybody is interested.

[pajeff02]

Catch can was delivered. Looking forward to installing this when I get back from the show this weekend.

[Cutlass]

Got the PRO 5.0 installed.

I've got enough pics to do a how to thread if anybody is interested.

Go for it!! I've been looking for a shifter install write-up to sticky in the manual trans section.

[Knight]

Catch can was delivered. Looking forward to installing this when I get back from the show this weekend.

Put your car in the tent, and you can do a live demonstration during the show.

[pajeff02]

Put your car in the tent, and you can do a live demonstration during the show.

Smokey burnouts at the top and bottom of the hour?

[Knight]

Smokey burnouts at the top and bottom of the hour?

Not bad.....and if Spaz is there - how to replace your rear diff!

[SMWS6TA]

Not bad.....and if Spaz is there - how to replace your rear diff! again

Fixed

[Knight]