Results 2,441 to 2,460 of 7102
-
08-12-2013, 10:08 AM #2441
-
08-12-2013, 10:14 AM #2442
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
08-12-2013, 10:31 AM #2443
they are black.
-
08-12-2013, 11:36 AM #2444
I had the same issue with some vinyl overlays for the "Pontiac" on the headlight. It looked grey. I had another set sent out...same problem. So I just pulled out my paint brush and with a very steady hand....got'er done!
BTW John....Looks nice, not too busy... my opinion
-
08-12-2013, 03:33 PM #2445
-
08-12-2013, 03:49 PM #2446
Drove around some at the Sturgis Bike Rally, won 2 Tee shirts for line loc'n it and grabbin a couple gears!
-
08-12-2013, 03:56 PM #2447
-
08-12-2013, 04:02 PM #2448Ported/Polished throttle body, Lingenfelter launch module, SLP line lock, QTP exhaust cutout, LS7 clutch, K&N, Ceramic coated longtubes, no cats, 3" exhaust, Flowmaster "B", Eibach springs, Midwest Chassis 9" rearend w/4.10's
-
08-13-2013, 09:02 AM #2449
New motor mounts. Massive pain in the ass for the first time doing them. Pretty sure i learned a few tricks and can do it a lot quicker if had to do them again.
-
08-13-2013, 09:10 AM #2450
Just got a day off to start working in the fuel rail covers.
-
08-13-2013, 11:15 AM #2451
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
ordered more parts for the engine :sulk
http://www.ls1.com/forums/f7/my-6-liter-build-174257/
http://www.ls1.com/forums/f8/my-8-8-rear-build-165553/
6.0L Block - Forged 403ci , Polluter Stg3 Cam, FAST 102mm Intake, NW102 TB, MSD wires, NGK TR6 plugs, Truck Coil Packs, LS3 Fuel Injectors, CC Pacesetter LT Headers, TS&P ORY, QTP e-Cutout, Magnaflow Muffler, 104mm Air Lid & Line Lock, Catch Can, Stage 2 T56 w/Viper shaft, PRO 5.0 Shifter, Tick MC, SPEC Stg3+ Clutch, QT SFI BH, MWC DSL, Full UMI Performance Suspension, Belstein Shocks, Hotchkis Springs (1" Drop), YR1 Snowflake Wheels wrapped in NT555 tires & Custom Fab Ford 8.8 rear w/Wavetrac Diff 3.73 Yukon Gears, WSQ Hood, 3"CM Strange Eng Drive Shaft.
00 FB Vert - Stock
78 FB - Just getting started......
Horsepower never lies, but is often lied about!
-
08-13-2013, 05:26 PM #2452
-
08-13-2013, 05:38 PM #2453
They were off of a c5. Already had both cut outs for the fuel lines. From what I understand that is the 97-98, and then they changed to just one fuel line.
-
08-14-2013, 07:25 AM #2454
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
you'll need to trim the passenger side in the back some too.
-
08-14-2013, 12:20 PM #2455
Finally installed Hurst. Why did I wait so long?! Makes it feel like a totally different car. The way it should ..Haha
-
08-14-2013, 07:32 PM #2456
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
08-15-2013, 08:43 AM #2457
Took mine out for a drive last nite in the cool MD air, and had some dude in a silver porsche carrera s rev at me. So I played along. We get on a nice open stretch on I97, I let him get the jump, then blew past him like he missed a shift or hit the brakes by mistake!! LOL. He got back next to me, rolled down his 5% tinted window, gave me a smile and thumbs up. Not bad for a $17k (mine) good ol' amer-can muscle!!
-
08-15-2013, 12:11 PM #2458
So much shorter. Grabbing 2nd gear has never been so easy.
-
08-18-2013, 12:22 PM #2459
- Join Date
- Nov 2007
- Location
- Ft. Rucker Area, Lower AL
- Posts
- 674
Arctic White- 01 TA / 06 Duc 749D
Installed this 8" Bazooka, it's ported and sounds decent. also installed a 6.5" pyle sub in the r/s sail panel. I haven't had any speakers in the sails since I got the TA, my son was a toddler back then and I wanted to protect his lil ears. He rides up front with me now and I keep the cut-out closed and the tunes lower so I figured upgrading to a full system was due. Sort of feel like a poser with this sub but I get a kick out of it. Right now it's wired in as the l/s sail panel sub and running off the stock amp. Suprisingly it hits pretty decent, will probably add an aftermarket amp to power the two sail panel subs and the front door speakers whenever I get around to replacing the door speakers, will probably just wait till those give out since I'm content with how it sounds for now.
ASA Cam, Built A4, 3500 Stall, LT's, ORY, Hooker CB, E Cut-out, Lid, Modified SSRA, , SFC's,UMI Tq Arm w/relo, Spohn LCA's, 3.73's, Free Mods, Dyno tuned by James @ SpeedShift Performance. Need more suspension mods!!!
-
08-18-2013, 04:27 PM #2460
Had no clue they made anything like that.
I had Bazookas in my Eagle Talon years ago -- they worked great.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks