Page 114 of 356 FirstFirst ... 1464748494110111112113114115116117118134144154164214264314 ... LastLast
Results 2,261 to 2,280 of 7102
  1. #2261
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,547

    Black/Black
    98 WS6/04 Sierra Dmax

    Made 465rwhp and 430rwtq through the muffler, It would have been a bit higher but the car couldn't get traction on the rollers.
    Callies 383, Trick Flow 225, Rapid Motorsports Dominatior 2 X cam, ls6 ported oil pump,42lb injectors, FAST 92/92 , ASP underdrive pully, eletric water pump, Pacesetter LT's, Pacesetter ORY, Magnaflow catback, e-cutout, Yank SS 3600, Performabuilt stage 2 4l60e, Strange S60 ,4.10s, Detroit Truetrac, (UMI) - Adj. LCA, Adj. tunnel mount torque arm, Adj. panhard bar, Drag bar, subframe conectors, shock tower brace. 465rwhp-438rwtq 11.09@119.90.

  2. #2262
    None Shall Pass Knight's Avatar
    Join Date
    Jan 2010
    Location
    East of Cleveland, Ohio
    Posts
    3,827

    Black
    99 WS.6 - Modified

    Quote Originally Posted by cpop98ws6 View Post
    Made 465rwhp and 430rwtq through the muffler, It would have been a bit higher but the car couldn't get traction on the rollers.
    Did you swap the rear tires the right way?







  3. #2263
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,547

    Black/Black
    98 WS6/04 Sierra Dmax

    haha I actually put the stock wheels on last night.

  4. #2264
    Member Nutball's Avatar
    Join Date
    Dec 2012
    Location
    Indiana
    Posts
    262

    Maple Red Metallic
    2001 T/A

    Very impressive Chris 465rwhp!!! NICE!!!

    Got my estimate on the damage today. 5k!! Damn GM parts are expensive these days. My TrueFiber hood was cheaper then the bumper/supports and the headlight assembly. Also got my BMR SFC today. Hawk rotors and brakes should be here in a few days. New LCA's, sway bars and shocks are my next addon. Rear end gear then Frost tune. I should be done for the summer..... YEAH......RRRRight!!!

  5. #2265
    Member bhunter0830's Avatar
    Join Date
    Apr 2012
    Location
    Fishers (Indianapols), IN
    Posts
    475

    Red
    2009 Pontiac G8 GT

    Quote Originally Posted by Nutball View Post
    Very impressive Chris 465rwhp!!! NICE!!!

    Got my estimate on the damage today. 5k!! Damn GM parts are expensive these days. My TrueFiber hood was cheaper then the bumper/supports and the headlight assembly. Also got my BMR SFC today. Hawk rotors and brakes should be here in a few days. New LCA's, sway bars and shocks are my next addon. Rear end gear then Frost tune. I should be done for the summer..... YEAH......RRRRight!!!
    Get the nose done and bring it up. We can make a dent in the rest in a good weekend.

  6. #2266
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,547

    Black/Black
    98 WS6/04 Sierra Dmax

    Thanks Dave! Hopefully I can get it to the track soon.

  7. #2267
    Senior Member theorangeguy's Avatar
    Join Date
    May 2013
    Location
    Nashville, TN
    Posts
    1,434

    Black / White
    '00 T/A M6/'19 Hemi Truck

    Before rubbing compound on the right, after rubbing compound on the left...gonna get this ole girl to shine like she's supposed to I did about half the car last night and i'll finish the rest in the next day or so. Gonna seal it when I get done...


  8. #2268
    Insurgent Hunter dethinboots's Avatar
    Join Date
    May 2011
    Location
    Fort Hood
    Posts
    412

    Impulse Blue
    2005 a4 GTO

    Quote Originally Posted by theorangeguy View Post
    Before rubbing compound on the right, after rubbing compound on the left...gonna get this ole girl to shine like she's supposed to I did about half the car last night and i'll finish the rest in the next day or so. Gonna seal it when I get done...

    Click for full size
    What was used?

  9. #2269
    Senior Member theorangeguy's Avatar
    Join Date
    May 2013
    Location
    Nashville, TN
    Posts
    1,434

    Black / White
    '00 T/A M6/'19 Hemi Truck

    Quote Originally Posted by dethinboots View Post
    What was used?
    meguiar's ultimate compound...i've used 3M, turtle, etc in the past but I tried meguiar's and i'll probably use it from this point forward. The best part is that you can do it by hand if you dont have a power buffer and it still looks great. Other compounds dont allow you to do that because of how abrasive they are. I've got a few scratches here and there that it got rid of, anything that was deep enough to not fade away im going to hit with some scratch filler/remover before sealing the paint back up. I also used it on the tail light that is built into the wing on my car and it polished it right up...I was happy about that because it was a little hazy from oxidation.
    Last edited by theorangeguy; 06-26-2013 at 05:40 AM.

  10. #2270
    Veteran pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    22,146

    Black & Blue
    '02 WS.6 / '07 Suburban

    Nice work, Patrick.

  11. #2271
    Member Nutball's Avatar
    Join Date
    Dec 2012
    Location
    Indiana
    Posts
    262

    Maple Red Metallic
    2001 T/A

    Quote Originally Posted by bhunter0830 View Post
    Get the nose done and bring it up. We can make a dent in the rest in a good weekend.
    It's a thought Ben. When I get the next shipment of "toys" I'll see what were doing. Maybe a road trip is in the picture.
    This weekend were going to weld the SFC and change that oval exhaust pipe. Drivers side from the "Y" pipe to the muffler. And something that has bothered me since I got this. My Dual tips seem to hang a wee bit to low for my taste. Going to break the welds and trim a few inches to bring them up a bit. Were basically stock from the cats to the MagnaFlow muffler and tips. I'd like to have a little more "throat" to it....but that can wait.

    oh...btw...Meguiars is awesome. That's all I ever use. Ultimate polish, Ultimate NXT wax and Detailer.
    Last edited by Nutball; 06-26-2013 at 04:11 PM.

  12. #2272
    Senior Member theorangeguy's Avatar
    Join Date
    May 2013
    Location
    Nashville, TN
    Posts
    1,434

    Black / White
    '00 T/A M6/'19 Hemi Truck

    Finished the rubbing compound on the car...finished sanding my TT2's and re-polished them...finished the autotrix passenger side window fix...AND installed my new power antenna. Was a busy weekend

    almost forgot...I found a bumper insert off a wrecked pewter TA...I sanded that down and painted it too. Only cost me $25 vs the $89+ I have seen them going for online...winning!
    Last edited by theorangeguy; 07-01-2013 at 06:42 AM.

  13. #2273
    MANWHORE TEAM suede's Avatar
    Join Date
    Apr 2007
    Location
    Your Mom's Bedroom
    Posts
    4,548

    Negro
    2000 Trans Am WS.6

    did the passenger window fix make a difference?

  14. #2274
    Senior Member theorangeguy's Avatar
    Join Date
    May 2013
    Location
    Nashville, TN
    Posts
    1,434

    Black / White
    '00 T/A M6/'19 Hemi Truck

    Quote Originally Posted by suede View Post
    did the passenger window fix make a difference?
    absolutely...my passenger side motor would make it about half way up and half way down before I did the fix. Now the motor goes all the way up and down with out stopping and it goes pretty quick. The first couple of days it would go a little over 3/4 of the way up/down but now it flies up and down. It was almost like it woke the motor up since its getting more volts That is $35 I would spend over and over again...the autotrix guys had it shipped within 10minutes of me hitting the pay button on the site.

  15. #2275
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Ordered brand new ARP rod bolts for $85 shipped yesterday. I was quite excited on the deal.
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  16. #2276
    Member RichWS6's Avatar
    Join Date
    May 2009
    Location
    Tucson AZ
    Posts
    173

    Black
    2001 Pontiac Trans am WS6

    This week I am going to finish up the back end, I pulled my Ford 9" off to replace the locker and put a posi back in it, and while I was in there I replaced the axle bearings, then I got the Tick master cylinder I am going to put on, looking forward to be able to shift easy again, not to mention street drive it with out the clatter of the locker to. I will post some pics while I am doing the job. While I pulled the axle out to I replaced the trans crossmember with the UMI one that moves the torque arm to, that was fun, again I will post pics later!

  17. #2277
    Member jonnyman's Avatar
    Join Date
    Jan 2007
    Location
    Chicopee, Ma
    Posts
    456

    candy tangerine
    1998 ws6 6spd

    drove it in our towns 4th of July parade.

  18. #2278
    Junior Member
    Join Date
    May 2013
    Location
    UpStateNY
    Posts
    13

    Midnight Blue
    2001 Trans Am WS6

    In less than 21 hrs i will get to see and drive my baby again. Hope the rain holds off so i can take the T-Tops out!!!!!!EXCITED

  19. #2279
    Senior Member Cutlass's Avatar
    Join Date
    Apr 2008
    Location
    Madison, WI
    Posts
    7,006

    1999 Formula WS6 M6-sold
    2001 Silverado Z71

    I sold my car today
    I feel like I've completely explored everything I wanted to explore with my car. But in the back of my mind, I know I'm gonna regret this.
    On the upside, I plan on using the cash to buy a boat or an RV/camper. Something I can enjoy with my family and friends. That's kinda a main reason right there. The car was all about me. Now its time for the family.

    Buy old friend
    -------------------------------------
    Kooks 1 7/8" race headers, Kooks ORY, Borla catback, Nitto 555R, LS6 intake manifold, Shaner S3 ported stock throttle body, SLP lid, smooth bellows, JAAM Ram Air kit, Elite Engineering catch can, LS6 valley cover, EGR and AIR deleted, Frost tune, and Simpson Racing child car seat in the back. 13.2 @ 108MPH

  20. #2280
    Veteran pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    22,146

    Black & Blue
    '02 WS.6 / '07 Suburban

    Always sorry to see someone let go of their ride.

Page 114 of 356 FirstFirst ... 1464748494110111112113114115116117118134144154164214264314 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. new guy just got my first trans am today
    By roger_johnson2002 in forum New Member Introductions
    Replies: 9
    Last Post: 07-14-2011, 08:35 AM
  2. Found this on the windshield of my Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 60
    Last Post: 03-10-2009, 12:11 PM
  3. Got into an accident in the Trans Am today
    By ls1camino in forum Almost Anything Goes
    Replies: 30
    Last Post: 09-21-2008, 04:32 PM
  4. Just got my Trans Am today!
    By vannatte in forum Firebird / WS6
    Replies: 34
    Last Post: 09-20-2007, 09:57 AM
  5. First time at Track today!!! 2000 Trans Am ws6
    By gimmeadonut in forum Drag Racing
    Replies: 1
    Last Post: 11-12-2005, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •