Some Street Racing

[Young11b]

My ex was filming and she didnt do so well but you get the pic

[ame]http://www.youtube.com/watch?v=9HYAtYgkHDI[/ame]
My 00' Trans Am vs Z28
[ame]http://www.youtube.com/watch?v=fnfOsgUnWKE[/ame]
vs. monte?
[ame]http://www.youtube.com/watch?v=CtbN-pJmFsY[/ame]
vs. 78' Malibu
[ame]http://www.youtube.com/watch?v=gbQBoZwyLSc[/ame]
vs. mustang
[ame]http://www.youtube.com/watch?v=2PooCnGe6k0[/ame]
vs Vette

[MrMasterCraft]

Nice vids man

Why was your girl asking you what were you doing?

[KING Z28 HAWK]

Nice! What's all done to the TA?

[Blackbird WS6]

the Malibu and MC put up a better fight then the stang did hahaha....very nice

x2..."why was your girl asking you what were you doing?"

[Young11b]

Just got the TA about 6 months ago and only have been able to drive it for about 6 weeks cuz of the Army and never beinng home so all it has is Stainless Works Long Tube Tuned Headers, Stainless Works 3" Stainless Steel Chambered Exhaust System, Catco High Flow Catalytic Convertors, Edelbrock Strut Tower Brace, 3.73 Richmond Rear End Gears & Volant Cold Air Intake. I havent gotten it tuned or anything yet, Im waiting after my next deployment when I get it supercharged. My girl said that cuz I cut thru an area in the median where it was clear so I didnt have to turn around down past the 1 mile mark lol. No traffic was comin so I thought it was ok lol

[Blackbird WS6]

Just got the TA about 6 months ago and only have been able to drive it for about 6 weeks cuz of the Army and never beinng home so all it has is Stainless Works Long Tube Tuned Headers, Stainless Works 3" Stainless Steel Chambered Exhaust System, Catco High Flow Catalytic Convertors, Edelbrock Strut Tower Brace, 3.73 Richmond Rear End Gears & Volant Cold Air Intake. I havent gotten it tuned or anything yet, Im waiting after my next deployment when I get it supercharged. My girl said that cuz I cut thru an area in the median where it was clear so I didnt have to turn around down past the 1 mile mark lol. No traffic was comin so I thought it was ok lol

sounds like its going to be a badass car when done...you going with a procharger?

[Young11b]

not sure yet, when im ready to put it in Im going to ask all you guys what you think

[Blackbird WS6]

not sure yet, when im ready to put it in Im going to ask all you guys what you think

f1 procharger is my pick....keep the stock block for now, when it blows just get a built 346 and you will see EZ over 700rwhp about 500-550 with the stock block b/c you have to keep boost down

[35th-ANV-SS]

f1 procharger is my pick....keep the stock block for now, when it blows just get a built 346 and you will see EZ over 700rwhp about 500-550 with the stock block b/c you have to keep boost down

Why do you think you need a F1 for that?

[Blackbird WS6]

Why do you think you need a F1 for that?

i dont...BUT if im going to spend the money im only going to do it one time lol...the F1 can make more but its worthless on the street

[bluehawk2000]

i dont...BUT if im going to spend the money im only going to do it one time lol...the F1 can make more but its worthless on the street

miswell build the block if your going to spend the money since you only going to do it one time to haha. Plus with that deployment money he will have alot saved up haha be plenty of money for building that car.

[Young11b]

Yeah I would like for it to be a one time thing lol. How much you think it will cost to get it built? I still want it to be a daily driver in the summer on nice days and not just a track car.

[Blackbird WS6]

Yeah I would like for it to be a one time thing lol. How much you think it will cost to get it built? I still want it to be a daily driver in the summer on nice days and not just a track car.

no one can tell you for sure how much a built engine is going to cost b/c theres to much unknown...heads/ intake/ what engine internals you go with

just the heads alone go from $1000-3000 new so it all depends

you need have to a goal in mind, you can make a shit load of power with boost and still be streetable

i would get a custom cam made for your specs/build

you might want to keep an eye on tech they have some good built engines for sale there, from $3000-7000 again its all depending on what you want

with all this HP you will need a trans and a rearend for sure sooo just keep that in mind

[35th-ANV-SS]

with all this HP you will need a trans and a rearend for sure sooo just keep that in mind

and suspension and tires and a clutch if M6

[Blackbird WS6]

and suspension and tires and a clutch if M6

will clutch is a given hahaha.....


tires are for pussys

[35th-ANV-SS]

will clutch is a given hahaha.....


tires are for pussys

or people who like actually "winning" races