1998Procharged CAMARO PARTOUT/12BOLT/BUILT T56/P1SC/interior

**9t8z28** · 08-06-2011, 11:03 AM

PLEASE, NO PRIVATE MESSAGES!!
PLEASE, NO PRIVATE MESSAGES!!

My PM box is almost full! Email me at 9t8z28@gmail.com or post in this thread.

I am parting out my 1998 LS1 Camaro. It was hit in the front end. The whole car will be stripped to nothing. Forgive me for not having prices on some items and some items are not posted but I will update as I get the chance. I am rushing posting this stuff for sale because I am trying to get the ball rolling. I need the money for my next car but I am not in such a rush that I am going to give the parts away so please no LOW BALLING.

Just so you all know, the car is not stripped yet.

I can take pics of everything and no prices are entirely firm. I may be high $ on some items.

SHIPPING IS NOT INCLUDED IN PRICE NOR IS PAYPAL FEES!

Engine

- LS6 intake w/ new seals (has been repaired but holds 10# of boost $250 (SOLD)
- LS6 coolant crossover (SOLD)
- 42# Green Top injectors $150 (SOLD)
- Racetronix pump w/ Hot Wire kit $180 (SOLD)

P1SC Procharger dual Intercooler KIT (SOLD)
- Pro-Flo bypass valve and standard bypass valve
- polished plenum
- 16” Flex-A-Lite fan & 9” Spal fans
- Some new hoses
- New belt
- T-bolt clamps
- used 6 rib setup w/ 3.5" blower pulley or
new 8 rib setup (NEVER USED) w/ 3.5" blower pulley (SOLD)
- additional pulley on standoff (NO BELT SLIPPAGE) for 6 & 8 rib
INTERCOOLERS ARE DENTED (FROM ACCIDENT) BUT STILL HOLD 15# OF BOOST
$3,700 or w/o INTERCOOLERS , make offer. PICS ARE ON PAGE TWO

- Poly Engine Mounts (SOLD)
- Jones Racing power steering and tensioner pulley (CUSTOM)
- LS1 Mass Airflow Sensor (WITH SCREEN)

Exhaust
- QTP Longtube headers 1/34 x 3” collector $450 (SOLD)
- 3” stainless true duals w/ X-pipe (over the axle) w/ CME TIPS $1,000 or $1,500 w/ rally red CME Valence
-

Suspension

- Koni front shocks $400
- Koni rear shocks $300
- SLP/Eibach springs (97SS optional springs) $300
- Boxed Stock LCA w/ 1LE bushings $40
- UMI Torque Arm $340 (SOLD)
- UMI Panhard Bar Relocation Kit $170 (SOLD)
- Strange 12 bolt / 4 channel/ Eaton Posi w/ tight clutches (like a locker) / set 10 bearings w/ c-clip eliminators / polished LPW support / LCA relocation brackets / JEGS torque arm relocation bracket /spicer yoke / 33 spline S/S axles / 4:10’s / $1,800 (SOLD)
- Strange chromoly driveshaft w/Spicer ends/ stock length $250(SOLD)
- Edelbrock adjustable panhard bar $75 (SOLD)
- Poly trans mount $50
- Front SLP swap bar $100
- Poly End Links
- Z28 Bump stops $50 (SOLD)
Transmission
- BUILT T56 Level II rebuild & MANY, MANY EXTRAZ (2Kmiles) $2,500
- Pro 5.0 shifter $130 (would like to sell with trans)
- Quick Time scatter shield $440 (2K miles)
- McLeod adjustable master cylinder $250 (would like to sell with trans)
- Skip shift eliminator $20 (would like to sell with trans)
- GM Updated Slave Cylinder $150 (2K MILES) (would like to sell with trans)

Other mods
- ABS/Traction Control delete

- 17 x 11 ZR1’s CHROME (rears) w/ Mickey Thompson 315/35/17DR's
- 17 x 9 ZR1’s CHROME (fronts) w/ Vredesteins 275's
$700 for all (4) (SOLD)

INTERIOR MODS

- Silver Face Gauge overlay
- Trans Am gauge bezel surround
- Mirrors (with LED turn signals) $150 MORE INFO ON PAGE 4, POST# 75
- (black) Trans Am seats w/Dual Seat heaters $700
- Complete set of used T/A seat covers $300 or sold individually
- Trans Am door panels (custom inserts) $200 (SOLD)
- New headliner $60
- New sun visors $
- 99 + steering wheel w/ radio controls to power aftermarket radio (PERFECT SHAPE) LOW MILES $140
- PAC (SWI-JACK) for steering wheel controls $30
- Gauge Pod w/ hardware (SOLD!)
- Autometer Wide Band Gauge (SOLD!)
- Autometer Fuel Press. Gauge (Electric) (SOLD!)
- Autometer Boost Gauge (Electric w/ MAP Sensor (SOLD!)
SEE ADDITIONAL INFO ON GAUGES ON PAGE 3, POST# 54

- SLP floor mats (SS) no winter months / super clean (discontinued from SLP) $100

EXTERIOR MODS
- clear front markers (3K miles) $40
- clear rear markers ($20)
- EXPORT taillights $300
- REAR BERGER TAILLIGHT PANEL (gloss black w/ stainless CAMARO inserts from Emblem Pro's $165
- SS Spoiler $350 (rally Red) just painted (1) year ago (PERFECT)
- SLP SS Grille (needs to be painted) $168 (SOLD)

I will add to this list. Sorry for it not being complete with prices.

[IMG][/IMG]
[IMG][/IMG]

**rgarner** · 08-07-2011, 12:10 PM

pm sent on the ls6 intake

***Ed Blown Vert*** · 08-07-2011, 01:24 PM

Do you have the 4.5" Intercoolers?

**dbrichrider33333** · 08-07-2011, 05:55 PM

pics and condition of qtp headers please? thanks

**9t8z28** · 08-07-2011, 06:36 PM

Pic of the 12 bolt as I was putting it in.

**9t8z28** · 08-07-2011, 06:53 PM

No, they are 3.5"

**9t8z28** · 08-07-2011, 06:55 PM

This is a P1SC Procharger. COMPLETE KIT! You woun't have to order any parts. Everything is included (bolt-on)
10K miles
Made 8# of boost (500rwhp)
Polished plenum
custom secondary tensioner (no belt slip at all & gained 1# with this mod)
brand new COMPLETE 8 rib setup
custom dual fans
full set of never used t-bolt clamps
brand new inlet hat
some new hoses
Pro-Flo bypass valve and standard bypass valve

The intercoolers were banged up but I just went to LOWES, got fittings to pressure tested them and they hold 15#. They are dirty and I guarantee they do not leak.

$3,700. If you want, I can include some other needed parts like the Racetronix pump kit and injectors and an additional price or OBO. I will also sell the kit minus the intercoolers. Make an offer.

[IMG][/IMG]

**cpop98ws6** · 08-07-2011, 07:48 PM

Very interested in the strange rear, transmission and possibly intake and injectors. Can you pm me your email or phone number?

**bonesbrakr** · 08-09-2011, 05:37 PM

Could use the intercoolers and piping shipped to NJ 07508. If the intercooler sells without them..... do not need the polished plenum tho.....

**jetaws6** · 08-10-2011, 10:54 AM

I sent you a email

**9t8z28** · 08-10-2011, 11:17 AM

Email me please.

**9t8z28** · 08-10-2011, 11:17 AM

Procharger is sold guys

**dbrichrider33333** · 08-10-2011, 01:09 PM

still interrested in qtp long tubes..any pics and what condition??

**1fastcamarosss11** · 08-10-2011, 04:55 PM

i would like the camaro ss plaque on the dash above radio. maybe the 3 pedal set also. price shipped to 44107 lakewood ohio.
best price 1800 on rear???

**0verkill** · 08-10-2011, 09:32 PM

price for the wide-band afr and fuel pess?

**WS6Dream** · 08-12-2011, 05:00 PM

Can you post an asking price for the 12 bolt? Edit: I'm stupid and read over it lol

Thanks

Edit: Same with gauge pod with all 3 gauges (wide band, fuel pressure, and boost).

Do you have t-top shades that are black/dark gray?

**BANDITO** · 08-12-2011, 06:05 PM

^_^ goodies

**9t8z28** · 08-13-2011, 06:47 AM

Here is a pic of the QTP 1-3/4" LTH's

$450 plus about $30 shipping and 2.9% Paypal fees.

**9t8z28** · 08-13-2011, 08:05 AM

I am selling the plaque with the bezel. LMK if you are still interested.

I might be keeping the pedals. I am not sure if they will work on a 04-07 CTS-V without drilling extra holes, (basically bugering them up)

The rear is pickup only. Thanks.