What track do you run at?
Printable View
I will be going to Numidia friday, last year i went to Island dragway in NJ.
Every friday numidia has street legal drags, i'm hopeing to sneak into the 11's this year. I dont want to push that little 10 bolt to much though lol
Painted my new(used) LS6 intake in preperation for the LS1-LS6 swap, carefully disconnected all lines/hoses/wires behind the intake and I swear the OPSU was broken before I moved the intake:rubeyes:, no one has one in stock of course, so now I wait 'till tomorrow to finish the project.
Picked it up from the exhaust shop
Soldered up my BCM, couldnt get the box to sit back in the dash right, but my radio stopped randomly turning off.
walked into my garage only to realize my black T/a is dirty just from sitting there after yesterdays wash.. today, both birds get a new clean! also changing a turn signal in the ta
sub frame connectors and adjustable lower control arms.
hopefully next week ls6 intake 80mm tb. it's getting there. slowly.
:lol:Quote:
Soldered up my BCM, couldnt get the box to sit back in the dash right, but my radio stopped randomly turning off.
--------------------------------------------------------------------------------
Last edited by pajeff02; Today at 05:23 AM. Reason: Correction
did I put 'saudered' instead of 'soldered'? :nilly:
Drove it to work today without hearing/feeling the annoying clunk I was getting from a torn transmission mount. Replaced it last night. It's nice going WOT without worrying that the transmission will jump thru the floor!
drove it yesterday. a little squeak coming from the rear. Still need to put on control arms, adj phb, lca relocation brackets. Also noticed a tick coming from the trans when i got home. not sure about that, gonna change fluid and filter
Jacked the bird up and installed lower control arms, relocation brackets and a panhard bar. took about 3 hrs laying on the ground with my small amount of handtools, lol but i got it done. noticed my pinion seal is leaking, so i guess thats next on the list.
Went 11.96 @ 113.8 with a 1.7 60ft tonight and didn't blow the rear!
^^ first 11 sec run?
[QUOTE=T/A98;2673943]^^ first 11 sec run?[/QUO
Yep
congrats