spark plugs 2 4 6 8 who do we appreciate

[GBurke]

ok I am trying to change a set of plugs on my 2002 ws6 trans am.
I am nervous about 2nd bolt removal on the bleed air check valve.
any help would be appreciated. I can get the front one out cold engine but second one I'm scared is going to break. already changed 1 3 5 7

[transamtom]

ok I am trying to change a set of plugs on my 2002 ws6 trans am.
I am nervous about 2nd bolt removal on the bleed air check valve.
any help would be appreciated. I can get the front one out cold engine but second one I'm scared is going to break. already changed 1 3 5 7

Spray it with some PB Blaster.

If it gets tight run it back in a bit and then try it again.

I had to do it for a few of my bolts when I did the headers.

[GBurke]

Thanks already sprayed it and taped it with a extension gonna let it seep in overnight since its already dark and try again tomorrow. wishing Gm had figured out a better place for the ac unit.

[pajeff02]

Welcome! After messing with the secondary air system for a while, I finally just deleted it. You can carefully try warming it up with a torch and pressing a candle stick against the bolt head. This will usually wick wax into the threads and help it to unbolt.

[GBurke]

Thanks. for the welcome. I will just let the rust peni work over night and see what happens in the morning. a little back and forth and more rust peni should do the trick just a pain in the ass job. gotta do it on a cold engine.

[Z28Thunder]

Welcome to LS1.com.

[GBurke]

Thanks Z28thunder.

[KahanaReef]

Welcome aboard! Hope you had better luck with it today.

[GBurke]

Yup got it out nice and easy.

[KahanaReef]

[wileyCoyote]