Results 1 to 6 of 6
  1. #1
    $ 25,000 panty dropper VENOMOUS's Avatar
    Join Date
    Jan 2008
    Location
    Waco
    Posts
    1,186

    2005 Ram SRT-10 QC 8.3l
    1999 FRC Black

    TPS % issues? Help me please wizards!

    O.K. after logging my cat for the first few times ever, ( rookie) I noticed that I may have found my low rpm ( 1200-1800rpm) bucking issue may be. My TPS% at say for example 55 mph ( this is just one of many instances throughout the logging) is at 0%. As far as I've read our TPS are not adjustable, correct? So.......maybe I need to raise the TPS via the adjuster screw for idle and do a idle relearn? Any other suggestions?

  2. #2
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,745

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    Change the TPS if you havent. Simple and cheap test to see if its actually the sensor

  3. #3
    $ 25,000 panty dropper VENOMOUS's Avatar
    Join Date
    Jan 2008
    Location
    Waco
    Posts
    1,186

    2005 Ram SRT-10 QC 8.3l
    1999 FRC Black

    Quote Originally Posted by JoshieDoom View Post
    Change the TPS if you havent. Simple and cheap test to see if its actually the sensor
    Well it seems to work right as I depress the pedal, not missing any range at all, so I figured why spend money on a new one if this one is working.
    It is like either the tab on the throttle body that moves the TPS is bent or just needs to be open a hair by idle screw. Any time I'm crusing along in any gear just putting around it is at 0%? My blade is barely open if at all ( pedal is all the way back out pretty much.)

  4. #4
    TunedbyFrost.com Tuner Frost's Avatar
    Join Date
    Jul 2007
    Location
    Richmond VA
    Posts
    2,415

    LS1.com Sponsor
    GM Tuner

    Unless you are pressing the gas at all it should be zero... or are you saying you are on the throttle and seeing 0 reported?

  5. #5
    $ 25,000 panty dropper VENOMOUS's Avatar
    Join Date
    Jan 2008
    Location
    Waco
    Posts
    1,186

    2005 Ram SRT-10 QC 8.3l
    1999 FRC Black

    Quote Originally Posted by Frost View Post
    Unless you are pressing the gas at all it should be zero... or are you saying you are on the throttle and seeing 0 reported?
    I am indeed on the throttle, but cruising speed like 55 in 6th or maybe 35-40 in 4th. Just low rpm crusing. It shows 0% and if I lift off the throttle I can tell I wa barely even in it. Like the minute amount of throttle it takes to do say 55-60 in 6th just isn;t registering TPS wise. I figure that it is putting me in the wrong fuel trim cells throughout the band. Now when I am at WOT it does register 100% and everything in between as a Potentiometer should. It;s just like the Throttle body isn't opening the blade on the TPS as early as it should. Factory TB by the way.

  6. #6
    Member zmg00camaross's Avatar
    Join Date
    Oct 2008
    Location
    missouri
    Posts
    764

    pewter
    2000 camaro ss

    you should be able to sweep the throttle open and check the percent as you are opening if anytime it goes to zero it's a bad sensor

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Right DRL issues
    By godless-phoenix in forum General Help
    Replies: 12
    Last Post: 09-23-2013, 05:16 PM
  2. any lawnmower engine wizards in here?
    By 310stanger in forum Almost Anything Goes
    Replies: 27
    Last Post: 05-14-2011, 05:16 PM
  3. Replies: 10
    Last Post: 10-29-2007, 03:50 AM
  4. the car is having issues
    By formula1804 in forum Firebird / WS6
    Replies: 2
    Last Post: 01-12-2007, 08:36 AM
  5. Question for stereo wizards out there?
    By JMC99 in forum Stereo and Electronics
    Replies: 1
    Last Post: 02-09-2006, 01:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •