P0410?

**War Theory** · 08-29-2009, 09:28 PM

Hey all I have been getting this error for some time and now I can't "keep it moving" until emission test came and I failed so I check the fuse all good but I have no idea were to check the hose's and pump or valve does anyone have a guide or pic's or step by step or blue-print of what to look at under the hood help pleaseeeeeeeeeeeeeeeeeeeeee

**Frost** · 08-29-2009, 10:20 PM

what mods do you have?

http://www.gearchatter.com/viewtopic9013.php

**War Theory** · 08-29-2009, 10:36 PM

Originally Posted by Frost

what mods do you have?

http://www.gearchatter.com/viewtopic9013.php

nothing yet I am still broke from the move

thanks for the help I was just looking for pic's so i would have a better understand of what i am looking for under the hood thanks again

**WikdWs6** · 08-31-2009, 12:39 PM

Give The Images Time To Load I Left Them in Full Size So You Can Read Them Easier, Hope This Helps

**War Theory** · 08-31-2009, 03:34 PM

you da man thanks I did change the valve I hope it clears the 0410 code...thanks again

**War Theory** · 08-31-2009, 04:52 PM

thanks again

**War Theory** · 09-02-2009, 09:20 PM

I had to change both side check valves and now I have to wait and hope the 0410 doesn't come back here it to keeping my fingers crossed

**WikdWs6** · 09-03-2009, 08:34 AM

Originally Posted by War Theory

you da man thanks I did change the valve I hope it clears the 0410 code...thanks again

Anytime

**War Theory** · 09-03-2009, 03:57 PM

just checked my car with my handy dandy Mac Et105 and everything is ready but 2 monitors the sec air, and the evap sys are both not ready... what is the cycle for both to kick in? I need to do my emisson very soon can this fail me?

**War Theory** · 09-03-2009, 04:53 PM

can a p0410 code fail my car ???

**War Theory** · 09-04-2009, 03:13 PM

just got the error code again its the pump..............will update after I install part

**WikdWs6** · 09-24-2009, 09:11 AM

Originally Posted by War Theory

just checked my car with my handy dandy Mac Et105 and everything is ready but 2 monitors the sec air, and the evap sys are both not ready... what is the cycle for both to kick in? I need to do my emisson very soon can this fail me?

The evap system monitor needs to see a full drive cycle as well as a cool down (usually overnight) to see the difference in engine coolant temp.

Model year 2001 and older you can pass with 2 monitors that do not run, 2002 and up you can still pass with one monitor that has not run.

Originally Posted by War Theory

can a p0410 code fail my car ???

Any MIL request by the computer will fail your car.

Sorry for the delayed response, very busy at work.