Results 1 to 2 of 2
-
12-24-2005, 10:58 PM #1craignelsonsGuest
p0405 code? Exhaust Gas Recirculation
Had exhaust put on two months ago and this code popped up recently.Took two fuses out and put back in and the code p0405 came up almost immediately. 1998 TA WS6 stock other than exhaust.Exhaust gas regulation circuit seems to be out of whack. Any suggestions? Guy at Autozone said to takt egr valve off and clean with carb cleaner, would still need new gasket if I did that wouldn't I. Thanks Guys and Gals for helping this newbie out.
-
12-27-2005, 03:56 PM #2
It's a low volt error: usually it shows up when a cable is disconnected / broken.
It may be the connector (bent plugs?). If it's a broken wire inside of the valve you'll have to replace it.
Carb cleaner won't help if it's dirty: you'll have to scratch the black stuff out of it.
You don't need a new seal.
I had the same issue and I installed an new (used) valve. Zero problems since then.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
C5 SLP Loudmouth Exhaust - WTT for Stock C5 Z06 Ti Exhaust
By EREBUS-SS in forum Parts Wanted / TradeReplies: 1Last Post: 09-27-2013, 12:08 PM -
code 0157 and exhaust smells like rotten eggs???
By JRENIGAR in forum General HelpReplies: 12Last Post: 06-16-2010, 07:25 AM -
P0404,p0405
By mpperry in forum General HelpReplies: 0Last Post: 06-26-2009, 06:08 PM -
Another exhaust thread: loud/deep exhaust?
By Aetos in forum External EngineReplies: 37Last Post: 08-16-2008, 02:01 PM -
Help Im getting a P0405
By kolkid in forum General HelpReplies: 0Last Post: 08-29-2005, 09:36 AM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks